201012_8_8_6.zip
Improved code for planar path with barrel tools

201001_8_8_6.zip
Custom postprocessor changes
Corrected problem that could affect motion around trail edge of bladefinish
Corrected orientation issue with fillet milling with helix method

200921_8_8_6.zip
Custom postprocessor changes
Improve lead/trail extensions for single blade paths

200903_8_8_6.zip
Fixed "advanced feeds" function with linked main+splitter operation
Add check for large rotary motion with vectors to/from a point


MAX-PAC_CADTranslator(x64)_8_8_6_0.exe
Improved script postprocessor user interface
Updated user interface to better support Multi-language display
Fixed issue with rotation sensitivity using a/d keys
Fixed user interface activation of stock with fillet radius
Improved curve unwrap-to-2D function
Improved Vericut tool library output
Fixed user interface input of separate clearances for Side A/B
Improved cutter input from legacy SRI case files
Corrected user interface for 3plus2 Advanced step sorting 
Fixed bug that could cause crash when selecting coordinate system trihedron
Fixed UI for single-blade SURDAT option
Fixed display of contact point for barrel tools in inch mode
Increased memory limit to help planar-SI cases
Improved fillet construction to help some cases that don't converge to a solution

200820_8_8_5.zip
Custom postprocessor changes

200803_8_8_5.zip
Fix for no-curl extension: disable wall-tolerance if active
Fix for no-curl extension: correct splitter extension
Corretion to barrel range limitation option
Custom postprocessor changes

200611_8_8_5.zip
Custom postprocessor changes

200603_8_8_5.zip
Fix conversion from fillet-by-curve to radius table for splitter cases

200528_8_8_5.zip
Custom postprocessor changes
Eliminated path backup warnings for plunging
Removed extra cleanup move for roughing splitter cases

200507_8_8_5.zip
Custom postprocessor changes

200501_8_8_5.zip
Increased memory limit to avoid problem with high-wrap parts
Custom postprocessor changes

200428_8_8_5.zip
Correction to variable fillet with edge data
Custom postprocessor changes

200420_8_8_5.zip
Custom postprocessor changes

MAX-PAC_CADTranslator(x64)_8_8_5_0.exe
Added support for new script posts in user interface
Fixed bug affecting fillet-by-curve with just one curve
Fixed MAX-SI path backup issue
Corrected flank milling issue that could cause unstable tool vectors
Fixed handlding of tool number from legacy CTI files
Improved Autocurve calculation that failed on some surfaces
Fixed toolpath transition for finish with linked splitter operation

200318_8_8_4.zip
Add code to make "tilt smoothing iterations" work with DRAG orientation method
Improve code for lift patches for splitter cases

200306_8_8_4.zip
Custom postprocessor changes

200203_8_8_4.zip
Fix when using Advanced Depth Blade finish with depth down to bottom of
fillet.

200225_8_8_4.zip
Fix to avoid crash with very small U-Pass stepover

200217_8_8_4.zip
Custom postprocessor changes

MAX-PAC_CADTranslator(x64)_8_8_4_0.exe
Improvements to support multi-language UI
Fixed home position GOHOME function
Repaired x_t file support that was missing
Fixed morphing of type=5 edges
Better handle bad/missing fillet data
Improved surface trim function
Handle extended (not unicode) characters in filenames
Custom postprocessor changes

MAX-PAC_CADTranslator(x64)_8_8_3_0.exe
Improvements to support multi-language UI
Fixed import of legacy cases with constant hub/shroud fillet
Fixed user interface for new "fillet with edges"
Improved error handling of oversize NURBS data
Eliminated extra surface generated with surface-extend function
Fixed spindle speed output problem affecting some posts
Custom postprocessor changes

MAX-PAC_CADTranslator(x64)_8_8_2_0.exe
Improve handling of tip trim failure
Correct path direction with "less air" option
Fix leftover geometry when creating cutback curve
Custom postprocessor changes

MAX-PAC_CADTranslator(x64)_8_8_1_0.exe
Fix program ID value in postprocessor
Correct bug that prevented opening Operation postprocessor settings
Fix problem with MAX5/AB slots
Correct From-Hub depths

MAX-PAC_CADTranslator(x64)_8_8_0_258.exe
Fix MAX-SI Corner rounding

MAX-PAC_CADTranslator(x64)_8_8_0_250.exe
Initial version 8.8 release

191124_8_7_9.zip
Custom postprocessor changes

191112_8_7_9.zip
Improve smoothness of tool vectors between spiral (FINCCC) finish passes
Custom postprocessor changes

191111_8_7_9.zip
Custom postprocessor changes

191108_8_7_9.zip
Custom postprocessor changes

191107_8_7_9.zip
Custom postprocessor changes

191023_8_7_9.zip
Correct license issue with MAX-SB only
Custom postprocessor changes


191017_8_7_9.zip
Custom postprocessor changes (MACH0335)

191010_8_7_9.zip
Custom postprocessor changes
Fix lift patch collision check with unequal blade and hub clearance

190929_8_7_9.zip
Custom postprocessor changes

8.7.9.0
Fix blunt edge display problem affecting some cases
Fix shroud fillet display
Support STL file as stock for 3plus2 operations
Notify user if Autocurve will approximate complex surfaces
Fix Display resolution of arcs in tool
Handle surface normal output (NVEC) in APT files
Fix UI bug: trailing edge curl distance input
Use new Microsoft VC redistributable
Fix UI bug: rake input values
Fix UI bug: some roughing method choices not being accepted
Fix simulation jump to button
Add clean up of unused/duplicated Options
New library for 3plus2 and MRS
Improve handling of Gauge length for posting imported APT files
Improve unwrapping of tip/hub curves (affects Autocurve)
Improve units inch/mm effect on tolerances in MRS

190922_8_7_8.zip
Custom postprocessor changes

190917_8_7_8.zip
Custom postprocessor changes

190911_8_7_8.zip
Correct unsmooth tool orientation for MAXSI splitter cases
Custom postprocessor changes

190906_8_7_8.zip
Fix MAXSI problem transitioning between box passes

190829_8_7_8.zip
SORFIN with variable step down is fixed.
Blending when using Advanced depths now moves normal to blade, fillet, or hub.
Custom postprocessor changes


190826_8_7_8.zip
Custom postprocessor changes

190822_8_7_8.zip
Include fillet-by-curve data when using splitter location parameter
Custom postprocessor changes

190820_8_7_8.zip
Include fillet-by-curve data when swapping CW/CCW with "reverse direction"
Custom postprocessor changes

190814_8_7_8.zip
Fix toolpoint spacing issue that happens on blade finish starting at trail extreme with Advanced Length/Depth
Custom postprocessor changes


Patch 190717_8_8_8.zip
Custom postprocessor changes

Patch 190625_8_7_8.zip
Custom postprocessor changes

Patch 190618_8.7.8.zip
Custom postprocessor changes

Patch 190614_8.7.8.zip
Fix issue with from-hub passes having large vector change above shroud
Fix issue with Barrel cutters, MAX-PAC was incorrectly saying the cutter did not fit

Patch 190607_8.7.8.zip
Custom postprocessor changes

Patch 190606_8.7.8.zip
Fix an issue with UPASS where the corner radius occasionally
became the wrong size.

Patch 190509_8.7.8.zip
Fix jump of tool vector at trailing edge of helix blisk finish
Custom postprocessor change


Patch 190430_8.7.8.zip
Fixed tip path tool default orientation method
Fixed single blade vector smoothing with lean angle

Patch 190423_8.7.8.zip
Custom postprocessor change
Correct MAXSB lean diretion for CCW cutting

Patch 190419_8.7.8.zip
Fix crash when using Vericut shank output in APT (VCTOUT)
Correct path for single blade with bull nose tool and fixed head

8.7.8.0
Fix bug in triangular path extension at splitter edge
Correct postprocessr transformation UI input boxes
Clean up shank filename comment output in APT and NC files

Fix link to F1 help for tool library

8.7.7.0
Improvements to simulation dialog text output window
For Single Blade: fix advanced length settings
For Single blade: Correct simulation kinematics
Keep MRS stock colors for in-process file
Improve loading speed of cases with lifting patches
Improve surface extend function

Patch 190325_8.7.6.zip
Customer postprocessor changes
Fixed Advanced Length feature for single blades

Patch 190317_8.7.6.zip
Customer postprocessor changes

8.7.6.0
Fixed another modeling problem with camberline mode introduced in 8.7.4.0 and 8.7.5.0
Fixed version number on startup screen to match Help-About

8.7.5.0
Fixed modeling problem with camberline mode introduced in 8.7.4.0
Fixed problem handling some CAD shapes as 3plus2 and MRS models
Fixed problem generating multiple operations with prelimniary cutter check active

8.7.4.0
Fixed license checkout problem for MAX-SB
Fixed path calculation for flat tools with nose-radius
Corrected input of MRS target model
Fixed problem that can corrupt saved cases when multiple cases are open
Corrected reading of NRB/NBB files with newer version number

Patch file: 190212_8.7.2.zip
Fixed problem recognizing variable fillet on splitter only
Corrected rake orientation for splitter cases when cutting only A-BS or AS-BR region
Customer postprocessor changes

8.7.3.0
Save v8.7 preferences in separate registry settings from old oversions
Fixed license checkout issues
Added missing cleanup of backup files
Improve Configuration Wizard to tesselate on parameter for 2 section (ruled) geometry
Fixed edge file input when LE,TE have different number of sections
Corrected problem with fillet-by-curve for splitter variant cases
Improved unwrap curve function
Improved loft function to avoid long delays on complex curves
Improved multi-surface isoline function
Fixed autocurve result affecting some surfaces, particulary STP models
Fixed crash with infinite-size CAD geometry
Fixed problem with tool&holder defined with mixed units inch/mm
Fixed bug that gave false holder geometry to 3plus2 and MRS calculations
Improved handling of Cutter Description fields
Using new 3rd party libraries for 3plus2 and MRS
Fixed problem with some 3plus2 settings not persisting
Fixed clearance height issue that affected some 3plus2 operations
Support Advanced Feeds for fillet operations
Fixed tool orientation problems when using Advanced Length values
Corrected color display of SF1 blades
Corrections to transformation settings in simulation

Patch file: 190129_8.7.2.zip
Customer-specific updates such as postprocessor changes

Patch file: 190128_8.7.2.zip
Fixed issue that can give unstable orientation with small Left and Right values
Corrected knot value option to apply value at proper fraction between tip and hub
Customer-specific updates such as postprocessor changes

