List of CE specific functions and variables:

Global Variables:
TrainerOrigin : A variable that contains the path of the trainer that launched cheat engine (Only set when launched as a trainer)
process : A variable that contains the main modulename of the currently opened process
MainForm: The main ce gui
AddressList: The address list of the main ce gui


Global Functions:
getCEVersion(): Returns a floating point value specifying the version of cheat engine
getCheatEngineFileVersion(): Returns the full version data of the cheat engine version. A raw integer, and a table containing major, minor, release and build


getOperatingSystem(): Returns 0 for Windows, 1 for Mac

activateProtection(): Prevents basic memory scanners from opening the cheat engine process (Not that useful)
enableDRM(altitude OPTIONAL, secondaryprocessid OPTIONAL ) : Prevents normal memory scanners from reading the Cheat Engine process (kernelmode)  The secondaryprocessid lets you protect another process. E.g the game itself, so they can't easily see what you change 

fullAccess(address,size): Changes the protection of a block of memory to writable and executable

loadTable(filename, merge OPTIONAL): Loads a .ct or .cetrainer. If merge is provided and set to true it will not clear the old table
loadTable(stream ,merge OPTIONAL, ignoreluascriptdialog BOOLEAN): Loads a table from a stream object
saveTable(filename, protect OPTIONAL, dontDeactivateDesignerForms OPTIONAL): Saves the current table. If protect is provided and set to true and the filename has the .CETRAINER extension, it will protect it from reading normally
saveTable(stream, dontDeactivateDesignerForms OPTIONAL): Saves the current table to a stream object

note: addresses can be strings, they will get interpreted by ce's symbolhandler

copyMemory(sourceAddress: integer, size: integer, destinationAddress:integer SEMIOPTIONAL, Method:integer OPTIONAL): 
  Copies memory from the given address to the destination address
  If no destinationAddress is given(or nil), CE will allocate a random address for you

  Method can be:
    nil/0: Copy from target process to target process
    1: Copy from target process to CE Memory
    2: Copy from CE Memory to target process
    3: Copy from CE Memory to CE Memory

  Returns the address of the copy on success, nil on failure
  
compareMemory(address1: integer; address2: integer; size: integer;  method: integer)
  Compares the memory and returns true if the same or false and and index where the first disparity is

  Method can be:
  0: Target to Target
  1: Address1=Target Address2=CE
  2: Address1=CE Address2=CE

readBytes(address,bytecount, ReturnAsTable ) : returns the bytes at the given address. If ReturnAsTable is true it will return a table instead of multiple bytes
  Reads the bytes at the given address and returns a table containing the read out bytes

writeBytes(address, x,x,x,x,...) : Write the given bytes to the given address from a table
writeBytes(address, table) : Write the given bytes to the given address from a table


readSmallInteger(address) : Reads a 16-bit integer from the specified address
readInteger(address) : Reads a 32-bit integer from the specified address
readQword(address): Reads a 64-bit integer from the specified address
readPointer(address): In a 64-bit target this equals readQword, in a 32-bit target readInteger()
readFloat(address) : Reads a single precision floating point value from the specified address
readDouble(address) : Reads a double precision floating point value from the specified address
readString(address, maxlength, widechar OPTIONAL) : Reads a string till it encounters a 0-terminator. Maxlength is just so you won't freeze for too long, set to 6000 if you don't care too much. Set WideChar to true if it is encoded using a widechar formatting
writeSmallInteger(address,value) : Writes a 16-bit integer to the specified address. Returns true on success
writeInteger(address,value) : Writes a 32-bit integer to the specified address. Returns true on success
writeQword(address, value): Write a 64-bit integer to the specified address. Returns true on success
writePointer(address,value)
writeFloat(address,value) : Writes a single precision floating point to the specified address. Returns true on success
writeDouble(address,value) : Writes a double precision floating point to the specified address. Returns true on success
writeString(address,text, widechar OPTIONAL) : Write a string to the specified address. Returns true on success

readBytesLocal(address,bytecount, ReturnAsTable) : See readBytes but then it's for Cheat engine's memory
readSmallIntegerLocal(address) : Reads a 16-bit integer from the specified address in CE's memory
readIntegerLocal(address) : Reads a 32-bit integer from the specified address in CE's memory
readQwordLocal(address) : Reads a 64-bit integer from the specified address in CE's memory
readPointerLocal(address) : ReadQwordLocal/ReadIntegerLocal depending on the cheat engine build
readFloatLocal(address) : Reads a single precision floating point value from the specified address in CE's memory
readDoubleLocal(address) : Reads a double precision floating point value from the specified address in CE's memory
readStringLocal(address, maxlength, widechar OPTIONAL)
writeSmallIntegerLocal(address,value) : Writes a 16-bit integer to the specified address in CE's memory. Returns true on success
writeIntegerLocal(address,value) : Writes a 32-bit integer to the specified address in CE's memory. Returns true on success
writeQwordLocal(address,value) : Writes a 64-bit integer to the specified address in CE's memory. Returns true on success
writePointerLocal(address,value)
writeFloatLocal(address,value) : Writes a single precision floating point to the specified address in CE's memory. Returns true on success
writeDoubleLocal(address,value) : Writes a double precision floating point to the specified address in CE's memory. Returns true on success
writeStringLocal(address,string, widechar OPTIONAL)
writeBytesLocal(address, x,x,x,x,...) : See writeBytes but then it's for Cheat Engine's memory
writeBytesLocal(address, table, , count) : See writeBytes but then it's for Cheat Engine's memory

readSmallInteger, readInteger, readSmallIntegerLocal, readIntegerLocal
can also have second boolean parameter. If true, value will be signed.

wordToByteTable(number): {}          - Converts a word to a bytetable
dwordToByteTable(number): {}         - Converts a dword to a bytetable
qwordToByteTable(number): {}         - Converts a qword to a bytetable
floatToByteTable(number): {}         - Converts a float to a bytetable
doubleToByteTable(number): {}        - Converts a double to a bytetable
extendedToByteTable(number): {}      - Converts an extended to a bytetable
stringToByteTable(string): {}        - Converts a string to a bytetable
wideStringToByteTable(string): {}    - Converts a string to a widestring and converts that to a bytetable

byteTableToWord(table, OPTIONAL signed:boolean): number       - Converts a bytetable to a word
byteTableToDword(table, OPTIONAL signed:boolean): number      - Converts a bytetable to a dword
byteTableToQword(table): number      - Converts a bytetable to a qword
byteTableToFloat(table): number      - Converts a bytetable to a float
byteTableToDouble(table): number     - Converts a bytetable to a double
byteTableToExtended(table): number   - Converts a bytetable to an extended and converts that to a double
byteTableToString(table): string     - Converts a bytetable to a string
byteTableToWideString(table): string - Converts a bytetable to a widestring and converts that to a string

bOr(int1, int2)   : Binary Or
bXor(int1, int2)  : Binary Xor
bAnd(int1, int2)  : Binary And
bShl(int, int2)   : Binary shift left
bShr(int, int2)   : Binary shift right
bNot(int)         : Binary not

enumMemoryRegions() : Returns an indexed table containing the memorylayout. Each entry consists out of: BaseAddress, AllocationBase, AllocationProtect, RegionSize, State, Protect, Type

writeRegionToFile(filename, sourceaddress,size) : Writes the given region to a file. Returns the number of bytes written
readRegionFromFile(filename, destinationaddress)

resetLuaState(): This will create a new lua state that will be used. (Does not destroy the old one, so memory leak)

createRef(...): integer - Returns an integer reference that you can use with getRef. Useful for objects that can only store integers and need to reference lua objects.  (Component.Tag...)
getRef(integer): ... - Returns whatever the reference points out
destroyRef(integer) - Removes the reference

encodeFunction(function): string - Converts a given function into an encoded string that you can pass on to decodeFunction
decodeFunction(string): function - Converts an encoded string back into a function.  Note that the string must be made on the same architecture as it is currently running. 32-bit can only load 32-bit, 64-bit can only load 64-bit.  So either have two scripts ready, or limit to only one architecture. (Like .EXE trainers)

encodeFunctionEx(string,pathtodll OPTIONAL) - See encodeFunction but uses a script instead of a function, and lets you specify which lua dll to use (Note: Still can't use 32-bit dll's in 64-bit and vice versa)


getTranslationFolder(): Returns the path of the current translation files. Empty if there is no translation going on
loadPOFile(path): Loads a .PO file used for translation
translate(string): Returns a translation of the string. Returns the same string if it can't be found
translateID(translationid: string, originalstring: string OPTIONAL): Returns a translation of the string id

ansiToUtf8(string): Converts a string in Ansi encoding to UTF8
utf8ToAnsi(string): Converts a string in UTF8 encoding to Ansi
Note: GUI components mainly show in UTF8, some other functions use Ansi, try to find out which ones...


enumModules(processid OPTIONAL):
  Returns a table containing information about each module in the current process, or the specified processid
  Each entry is a table with fields
    Name : String containing the modulename    
    Address: Integer representing the address the module is loaded
    Is64Bit: Boolean set to true if it's a 64-bit module
    PathToFile: String to the location this module is loaded

md5memory(address, size): Returns a md5 sum calculated from the provided memory. 
md5file(pathtofile): Returns a md5 sum calculated from the file. 
getFileVersion(pathtofile): returns the 64-bit file version, and a table that has split up the file version into major, minor, release and build

getFileList(Path:string, searchMask:string OPTIONAL, SearchSubDirs: boolean OPTIONAL, DirAttrib: integer OPTIONAL): Returns an indexed table with filenames
getDirectoryList(Path:string, SearchSubDirs: boolean OPTIONAL): Returns an indexed table with directory names
extractFileName(filepath): returns the filename of the path
extractFilePath(filepath): removes the filename from the path

enableWindowsSymbols(): Will download the PDB files of Windows and load them (Takes a long time the first time)
getAddress(string, local OPTIONAL): returns the address of a symbol. Can be a modulename or an export. set Local to true if you wish to querry the symboltable of the ce process
enableKernelSymbols(): Will check the option for kernelmode symbols in memory view (Gets only the exports unless enableWindowsSymbols() is used)
getAddressSafe(string, local OPTIONAL, shallow OPTIONAL): returns the address of a symbol, or nil if not found. Similar to getAddress when errorOnLookup is false, but returns nil instead
getSymbolInfo(symbolname): Returns a table as defined by the SymbolList class object (modulename, searchkey, address, size)
getModuleSize(modulename): Returns the size of a given module (Use getAddress to get the base address)
getRTTIClassName(address): Returns the classname of a given structure based on RTTI information (assuming it can be found, returns nil if not or unknown)

reinitializeSymbolhandler(waittilldone: BOOLEAN OPTIONAL, default=TRUE): reinitializes the symbolhandler. E.g when new modules have been loaded
reinitializeDotNetSymbolhandler(modulename OPTIONAL): Reinitializes only the DotNet part of the symbol list. (E.g After an ILCode has been JITed) (6.4+)
reinitializeSelfSymbolhandler(waittilldone: BOOLEAN OPTIONAL, default=TRUE): reinitializes the selfsymbolhandler. E.g when new modules have been loaded to CE process
waitForSections(): Waits till the sections have been enumerated
waitForExports(): Waits till all DLL Exports are loaded 
waitForDotNet(): Waits till all .NET symbols are loaded (this includes DLL Exports)
waitForPDB(): Waits till all PDB symbols are loaded (this includes DLL Exports, and .NET)
searchPDBWhileLoading(state: boolean): Will interrupt symbol enum to query the debughelp symbol handler about a specific symbol. This can take a while. Default is false

errorOnLookupFailure(state): If set to true (default) address lookups in stringform will raise an error if it can not be looked up. This includes symbolnames that are not defined and pointers that are bad. If set to false it will return 0 in those cases
  (Useful for pointers that don't work 100% of the time)
6.4+:Returns the original state

waitforsymbols(state): If set to true looking up a symbol will wait for the symbol to be loaded(default true)

generateAPIHookScript(address:string, addresstojumpto:string, addresstogetnewcalladdress:string OPT, ext:string OPT, targetself:boolean OPT) : Generates an auto assembler script which will hook the given address when executed
autoAssemble(text, targetself OPTIONAL, disableInfo OPTIONAL) : runs the auto assembler with the given text. Returns true on success, with as secondary a table you can use when disabling (if targetself is set it will assemble into Cheat Engine itself). If disableInfo is provided the [Disable] section will be handled
autoAssemble(text, disableInfo OPTIONAL)

autoAssembleCheck(text, enable, targetself) : Checks the script for syntax errors. Returns true on succes, false with an error message on failure

registerEXETrainerFeature(FeatureName:String, function():table): adds a new feature to the exe trainer generator window, and calls your function when the user builds an .exe trainer.  The function should return a table with table entries: PathToFile and RelativePath.
  example output:
    [1]: 
      PathToFile=c:\cefolder\autorun\mycode.lua
      RelativePath="autorun\"

    [2]: 
      PathToFile=c:\cefolder\autorun\dlls\mycode.lua
      RelativePath="autorun\mylib.dll"

Note: This runs AFTER the table has been packaged already

                  
unregisterEXETrainerFeature(id)


registerAutoAssemblerCommand(command, function(parameters, syntaxcheckonly)): Registers an auto assembler command to call the specified function. The command will be replaced by the string this function returns when executed. The function can be called twice. Once for syntax check and symbol lookup(1), and the second time for actual execution by the assembler(2) if it has not been removed in phase1.
  Note: The callback function can return multiple values
  Nil, <String>: Will raise an error with the given string
  MultilineString: Replaces the line in the script with the given strings.


 If the function returns nil, and as secondary parameter a string, this will make the auto assembler fail with that error

unregisterAutoAssemblerCommand(command)


registerLuaFunctionHighlight(functionname): Makes the lua highlighter show the functionname as a functionkeyword
unregisterLuaFunctionHighlight(functionname): Removes the given name from showing up as a functionkeyword


registerSymbolLookupCallback(function(string):integer, location): ID  6.4+
  Registers a function to be called when a a symbol is parsed
  Location determines at what part of the symbol lookup the function is called
    slStart: The very start of a symbol lookup. Before tokenization
    slNotInt: Called when it has been determined it's not a hexadecimal only string. Before tokenization
    --The following locations can be called multiple times for one string as they are called for each token and appended token
    slNotModule: Called when it has been determined the current token is not a modulename
    slNotUserdefinedSymbol: Called when it has been determined it's not a userdefined symbol
    slNotSymbol: Called when it has been determined it's not a symbol in the symbollist
    slFailure: Called when it has no clue what the given string is

    Note: slNotSymbol and slFailure are similar, but failure comes only if there's no token after the current token that can be concatenated. Else slNotSymbol will loop several times till all tokens make up the full string


  Return an Integer with the corresponding address if you found it. Nil or 0 if you didn't.

unregisterSymbolLookupCallback(ID): Removes the callback


registerAddressLookupCallback(function(integer):string): ID
  Registers a function to be called when the name of an address is requested

unregisterAddressLookupCallback(ID): Removes the callback


registerStructureAndElementListCallback(function StructureListCallback(), function elementlistcallback(id1,id2) ) : Registers a function to be called when a structure needs to be dissected 
  function StructureListCallback() will be a function that returns an array of list of structures in table format
  the entries are build up as:
    name: string - name of the structure
    id1: integer - id you can use for whatever(e.g moduleid). It will be passed on to elementlistcallback when this structure is picked
    id2: integer - id you can use for whatever(e.g structureid inside the module). It will be passed on to elementlistcallback when this structure is picked

  
  function elementlistcallback(id1,id2) will be a function that returns an array of structure elements in table format
  the entries are build up as:
    name: string
    offset: integer
    vartype: variabletype (look up vtByte, vtWord, etc..)

  tip: If you return an empty table the structure will not be created. You can use this to create the structure layout yourself and register that instead

unregisterStructureAndElementListCallback(ID)


registerStructureDissectOverride(function(structure, baseaddress): table):
  same as onAutoGuess, but is called by the structure dissect window when the user chooses to let cheat engine guess the structure for him.
  Use the structure object to fill it in
  Return true if you have filled it in, or false or nil if you did not

  Tip: Use inputQuery to ask the user the size if your function doesn't do that automatically


unregisterStructureDissectOverride(ID)

registerStructureNameLookup(function(address): name, address OPTIONAL):
  Registers a function to be called when dissect data asks the user for the name of a new structure define. If you have code that can look up the name of a structure, and perhaps also the real starting point, you can use this to improve the data dissection.

unregisterStructureNameLookup(ID)

registerAssembler(function(address, instruction):bytetable)
  Registers a function to be called when the single line assembler is invoked to convert an instruction to a list of bytes
  Return a bytetable with the specific bytes, or nil if you wish to let another function, or the original x86 assembler to assemble it

unregisterAssembler(ID): Unregisters the registered assembler

registerAutoAssemblerPrologue(function(script, syntaxcheck), postAOB:boolean=false)
  Registers a function to be called when the auto assembler is about to parse an auto assembler script. The script you get is after the [ENABLE] and [DISABLE] tags have been used to strip the script to the according one, but before comment stripping and trimming has occured

  script is a Strings object which when changed has direct effect to the script

unregisterAutoAssemblerPrologue(ID)

registerAutoAssemblerTemplate(name, function(script: TStrings; sender: TFrmAutoInject), shortcut OPTIONAL ): id - Registers an template for the auto assembler. The script parameter is a TStrings object that has a direct connection to the current script. (All script parsing is up to you...).  Returns an ID
unregisterAutoAssemblerTemplate(ID)


generateCodeInjectionScript(script: Tstrings, address: string) - Adds a default codeinjection script to the given script
generateAOBInjectionScript(script: Tstrings, symbolname: string, address: string, commentradius(default 10)) - Adds an AOB injection script to the given script
generateFullInjectionScript(script: Tstrings, address: string, commentradius(default 10)) - Adds a Full Injection script to the given script

getNextAllocNumber(script: TStrings): integer - scans the given script for alloc(newmem## and returns the next unused newmem number)
addSnapshotAsComment(script: TStrings, address: integer, radius(Default 10)) - creates a comment section for AA scripts that contains a snapshot of the original code
getUniqueAOB(address): AOBString,Offset - Scans for a unique AOB for the given address and returns the AOB as a string, and an offset applied in case the aob returned doesn't start at the given address



showMessage(text) : shows a messagebox with the given text
inputQuery(caption, prompt, initialstring): Shows a dialog where the user can input a string. This function returns the given string, or nil on cancel
showSelectionList(title, caption, stringlist, allowCustomInput OPTIONAL): integer,string - Shows a menu with the given list. It returns the linenumber (starting at 0) and the selected string.  Linenumber is -1 if the user was allowed to enter custom input

messageDialog(text, type, buttons...) : pops up a messagebox with a specific icon/sound with the specified buttons (mbok, mbyes, ....)
messageDialog(title, text, type, buttons...): ^ but adds a custom title

sleep(milliseconds): pauses for the number of specified milliseconds (1000= 1 sec...)

getProcesslist(Strings): Fills a Strings inherited object with the processlist of the system. Format: %x-pidname
getProcesslist(): Returns a table with the processlist  (pid - name )
getWindowlist(Strings): Fills a Strings inherited object with the top-window list of the system. Format: %x-windowcaption
getWindowlist(): Returns a table with the windowlist (pid - window caption ).  The table is formatted as : {pid,{id,caption}}


getThreadlist(List): fills a List object with the threadlist of the currently opened process. Format: %x
getHandleList(filter OPTIONAL): returns a table with all the handles in the system(Filter 0=everything, 1=target process handles only, 2 handles to target process, 3 handles to ce process).  Each handle entry has fields: ProcessID, ObjectTypeIndex, HandleAttributes, HandleValue, Object and GrantedAccess.  Note: Object will be invalid if you use the 32-bit CE on a 64-bit windows

closeRemoteHandle(handle, processid OPTIONAL): Closes the handle of a process.

duplicateHandle(handle): Duplicates the provided CE based handle into the target process (You still need tell the target about this handle, like an injected dll data block)
duplicateHandle(handle, Mode (0/1) ): If mode is 0 then it's the same as just duplicateHandle(handle), but if it's 1 it duplicates the target process handle into CE's process
duplicateHandle(handle, fromPID, toPID): Copies the handle from the given process to the target process. 


function onOpenProcess(processid):
  If this function is defined it will be called whenever cheat engine opens a process.
  Note: The the same process might be opened multiple times in a row internally
  Note 2: This function is called before attachment is fully done. You can call reinitializeSymbolhandler() to force the open to complete, but it will slow down process opens. Alternatively, you could launch a timer which will run when the opening has finished


MainForm.OnProcessOpened: function(processid, processhandle, caption) - Define this if you want to be notified when a new process has been opened. Called only once from the main thread. It is recommended to use this instead of onOpenProcess

function onTableLoad(before): If defined this function will be called twice when a table gets loaded. Once before the loading, and once after.



getOpenedProcessID() : Returns the currently opened process. If none is open, returns 0
getOpenedProcessHandle(): Returns the handle of the currently opened process
getProcessIDFromProcessName(name) : returns a processid
openProcess(processid) : causes cheat engine to open the given processid
openProcess(processname): causes cheat engine to find and open the given process
openFileAsProcess(filename,is64bit OPTIONAL,startaddress OPTIONAL): causes cheat engine to open the file with memory access as if it's a process
saveOpenedFile(filename OPTIONAL): Saves the changes of the opened file, set filename if you want a different file
setPointerSize(size): Sets the size cheat engine will deal with pointers in bytes. (Some 64-bit processes can only use 32-bit addresses)
setAssemblerMode(int): 0=32-bit, 1=64-bit
pause() : pauses the current opened process
unpause(): resumes the current opened process


getCPUCount(): Returns the number of CPU's
cpuid(EAX,ECX): returns a table with CPUID info (EAX, EBX, ECX, EDX)

gc_setPassive(state: boolean): enables/disables the passive garbage collector
gc_setActive(state: boolean, interval: integer, minsize: integer): enables/disables the active garbage collector and lets you configure the interval and minimim size


getSystemMetrics(index): Retrieves the specified system metric or system configuration setting
(https://msdn.microsoft.com/en-us/library/windows/desktop/ms724385.aspx)

getScreenDPI(): Returns the Dots/Pixels Per Inch of the screen
getScreenHeight(): Returns the screen height
getScreenWidth(): Returns the screen  width

getWorkAreaHeight(): Returns the work area height
getWorkAreaWidth(): Returns the work area width

getScreenCanvas(): Returns a Canvas object you can use to write to the screen (Note: Not as useful as you may think)

getPixel(x,y) : returns the rgb value of the pixel at the specific screen coordinate
getMousePos: returns the x,y coordinates of the mouse
setMousePos(x,y): sets the mouse position

isKeyPressed(key) : returns true if the specified key is currently pressed
keyDown(key) : causes the key to go into down state
keyUp(key) :causes the key to go up
doKeyPress(key) : simulates a key press

mouse_event(flags, x OPTIONAL, y OPTIONAL, data OPTIONAL, extra OPTIONAL) - The mouse_event windows API.  Check MSDN for information on how to use

shortCutToText(shortcut): Returns the textual representation of the given shortut value (integer) (6.4+)
textToShortCut(shortcutstring): Returns an shortcut integer that the given string represents.  (6.4+)

convertKeyComboToString(key1,...): Returns a string representation of the given keys like the hotkey handler does
convertKeyComboToString({key1,...}): ^


outputDebugString(text): Outputs a message using the windows OutputDebugString message. You can use tools like dbgview to read this. Useful for testing situations where the GUI freezes

shellExecute(command, parameters OPTIONAL, folder OPTIONAL, showcommand OPTIONAL): Executes a given command

getTickCount() :  Returns the current tickcount since windows was started. Each tick is one millisecond
processMessages() :  Lets the main eventhandler process the new messages (allows for new button clicks)
inMainThread(): Returns true if the current code is running inside the main thread (6.4+)
integerToUserData(int):  Converts a given integer to a userdata variable
userDataToInteger(UserDataVar):  Converts a given userdata variable to an integer

synchronize(function(...), ...): Calls the given function from the main thread. Returns the return value of the given function
queue(function(...),...): calls the given function from the main thread. Does not wait for the result. Note: Be sure to synchronize and call checkSynchronize() before freeing the calling thread
checkSynchronize(timeout OPTIONAL): Call this from an infinite loop in the main thread when using threading and synchronize calls. This will execute any queued synchronize calls

writeToClipboard(text):  Writes the given text to the clipboard
readFromClipboard():  Reads the text from the clipboard



speedhack_setSpeed(speed) : Enables the speedhack if needed and sets the specific speed
speedhack_getSpeed(): Returns the last set speed

injectDLL(filename, skipsymbolreloadwait OPTIONAL): Injects a dll or dylib, and returns true on success
injectLibrary(filepath, skipsymbolreloadwait OPTIONAL): Same as injectDLL, just sounds better

injectDotNetDLL(dllpath, FullClassName, MethodName,parameterstring)

executeCode(address, parameter OPTIONAL, timeout OPTIONAL) : address - Executes a stdcall function with 1 parameter at the given address in the target process  and wait for it to return. The return value is the result of the function that was called
executeCodeLocal(addres, parameter OPTIONAL): address -  Executes a stdcall function with 1 parameter at the given address in the target process. The return value is the result of the function that was called

executeCodeEx(callmethod, timeout, address, {type=x,value=param1} or param1,{type=x,value=param2} or param2,...)
callmethod: 0=stdcall, 1=cdecl
  timeout: Number of milliseconds to wait for a result. nil or -1, infitely. 0 is no wait (will not free the call memory, so beware of it's memory leak)
  address: Address to execute
  {type,value} : Table containing the value type, and the value
    {
    type: 0=integer (32/64bit) can also be a pointer
          1=float (32-bit float)
          2=double (64-bit float)
          3=ascii string (will get converted to a pointer to that string)
          4=wide string (will get converted to a pointer to that string)
     
    value: anything base type that lua can interpret
    }
  if just param is provided CE will guess the type based on the provided type

executeMethod(callmethod, timeout, address, {regnr=0..15,classinstance=xxxxxxxx} or classinstance, {type=x,value=param1} or param1, {type=x,value=param2} or param2,...) - Executes a method.
  regnr can be:
    0: R/EAX
    1: R/ECX
    2: R/EDX
    3: R/EBX
    4: R/ESP
    5: R/EBP
    6: R/ESI
    7: R/EDI
    8: R8
    9: R9
    10: R10
    11: R11
    12: R12
    13: R13
    14: R14
    15: R15
  

  If no register number is provided then ECX(1) is picked
  If instance is nil it is the same as executeCodeEx

executeCodeLocalEx(address, {type=x,value=param1} or param1,{type=x,value=param2} or param2,...)
  Calls a function using the given callmethod and parameters
  
  
  If a direct parameter is given instead of a table entry describing the type, CE will 'guess' the type it is

  Returns the E/RAX value returned by the called function (if no timeout or other interruption)





loadPlugin(dllnameorpath): Loads the given plugin. Returns nil on failure. On success returns a value of 0 or greater

loadFontFromStream(memorystream) : Loads a font from a memory stream and returns an id (handle) to the font for use with unloadLoadedFont
unloadLoadedFont(id)




onAutoGuess(function) :
  Registers an function to be called whenever autoguess is used to predict a variable type
  function override (address, ceguess): Return the variable type you want it to be. If no change, just return ceguess




closeCE() : just closes ce
hideAllCEWindows() : makes all normal ce windows invisible (e.g trainer table)
unhideMainCEwindow() : shows the main cheat engine window

getAutoAttachList(): returns the AutoAttach StringList object. It can be controlled with the stringlist_ routines (it's not recommended to destroy this list object)


AOBScan(x,x,x,x,...):
scans the currently opened process and returns a StringList object containing all the results. don't forget to free this list when done
Bytevalue of higher than 255 or anything not an integer will be seen as a wildcard
AOBScan(aobstring): see above but here you just input one string
AOBScanUnique(aobstring)- Integer: scans for the aobstring and returns the first result it finds and nil if nothing is found. Make sure it is unique as it will return the first result found as it will return any random match



Regarding eventhandlers. You can initialize them using both a string of a functionname or the function itself.
If initialized using a function itself it won't be able to get saved in the table


allocateMemory(size, BaseAddress OPTIONAL, Protection OPTIONAL): Allocates some memory into the target process
deAlloc(address, size OPTIONAL): Frees allocated memory

allocateSharedMemory(name, size):
  Creates a shared memory object in the attached process of the given size if it doesn't exist yet. If size is not given and there is no shared region with this name then the default size of 4096 is used
  It then maps this shared memory block into the currently targeted process. It returns the address of this mapped region in the target process.  Keep in mind that a process can map the same block multiple times, so keep track of your assignments
allocateSharedMemoryLocal(name, size): Same as allocateSharedMemory but then for the Cheat Engine process itself


createSection(size) : Creates a 'section' in memory
mapViewOfSection(section, preferedBaseAddress OPTIONAL): Maps the section to memory
unMapViewOfSection(baseaddress): Unmaps a section from memory


getForegroundProcess() : Returns the processID of the process that is currently on top


findWindow(classname OPTIONAL, caption OPTIONAL): windowhandle - Finds a window with the given classname and/or windowname
getWindow(windowhandle, command) : windowhandle - Gets a specific window based on the given window (Check MSDN getWindow for the command description)
getWindowCaption(windowhandle) : string - Returns the caption of the window
getWindowClassName(windowhandle): string - Returns the classname of the window
getWindowProcessID(windowhandle): processid - Returns the processid of the process this window belongs to
getForegroundWindow() - windowhandle : Returns the windowhandle of the topmost window

sendMessage(hwnd, msg, wparam, lparam): result - Sends a message to a window. Those that wish to use it, should know how to use it (and fill in the msg id's yourself)
hookWndProc(hwnd, function(hwnd, msg, wparam, lparam), ASYNC: BOOL) - Hooks a window's wndproc procedure. The given function will receive all functions.  Return 0 to say you handled it. 1 to let the default windows handler deal with it. Or anything else, to let the original handler deal with it.  Besides the return value, you can also return hWnd, Msg, lParam and wParam, modified, or nil for the original value.  Set ASYNC to true if you don't want to run this in the CE GUI. (faster, but you can't touch gui objects)
unhookWndProc(hwnd) - call this when done with the hook.  Not calling this will result in the process window behaving badly when you exit CE


cheatEngineIs64Bit(): Returns true if CE is 64-bit, false if 32-bit
targetIs64Bit(): Returns true if the target process is 64-bit, false if 32-bit



getCheatEngineDir(): Returns the folder Cheat Engine is located at
getCheatEngineProcessID(): Returns the processid of cheat engine

getAutorunPath() : Returns the autorun path
getUserDocumentsPath() : Returns the path to the user documents folder. 


disassemble(address): Disassembles the given address and returns a string in the format of "address - bytes - opcode : extra"
splitDisassembledString(disassembledstring): Returns 4 strings. The address, bytes, opcode and extra field

getInstructionSize(address): Returns the size of an instruction (basically it disassembles the instruction and returns the number of bytes for you)
getPreviousOpcode(address): Returns the address of the previous opcode (this is just an estimated guess)


beep() : Plays the fabulous beep/ping sound!
playSound(stream, waittilldone OPTIONAL): Plays the given memorystream containing a .WAV formatted memory object. If waittilldone is true the script will stop executing till the sound has stopped
playSound(tablefile, waittilldone OPTIONAL) : Takes the memorystream from the tablefile and plays it.
  There are two tablefiles predeclared inside cheat engine "Activate" and "Deactivate" . You are free to use or override them

speak(text, waittilldone OPTIONAL): Speaks a given text.  If waitTillDone is true the thread it's in will be frozen till it is done
speak(text, flags): Speaks a given text using the given flags. https://msdn.microsoft.com/en-us/library/speechplatform_speakflags.aspx
speakEnglish(text, waittilldone OPTIONAL) - will try the English voice by wrapping the given text into an XML statement specifying the english voice. Will not say anything if no Egnlish language is present. Do not use SPF_IS_NOT_XML flag and SPF_PARSE_SSML won't work in this situation



printf(...) : Same as print(string.format(...))
setProgressState(state): Sets the state of the cheatengine task in the taskbar (windows only) values: tbpsNone, tbpsIndeterminate, tbpsNormal, tbpsError, tbpsPaused
setProgressValue(current, max): Sets the state of the cheatengine task progress status


getUserRegistryEnvironmentVariable(name): string - Returns the environment variable stored in the user registry environment
setUserRegistryEnvironmentVariable(name, string) - Sets the environment variable stored in the user registry environment
is when you've changed the environment variables in the registry. This will cause at least the shell to update so you don't have to reboot. (It's always recommended to reboot though)

stringToMD5String(string): Returns an md5 hash string from the provided string


getFormCount() : Returns the total number of forms assigned to the main CE application
getForm(index): Returns the form at the specific index

registerFormAddNotification(function(form)): Registers a function to be called when a form is attached to ce's form list. This is useful for extentions that add new functionality to certain existing forms. It returns an object you can use with unregisterFormAddNotification
unregisterFormAddNotification(Object)


getSettingsForm(): Returns the main settings form
getMemoryViewForm() : Returns the main memoryview form class object which can be accessed using the Form_ class methods and the methods of the classes it inherits from. There can be multiple memory views, but this will only find the original/base
getMainForm() : Returns the main form class object which can be accessed using the Form class methods and the methods of the classes it inherits from

getApplication() : Returns the application object. (the titlebar)
getAddressList() : Returns the cheat table addresslist object
getFreezeTimer() : Returns the freeze timer object
getUpdateTimer() : Returns the update timer object



setGlobalKeyPollInterval(integer): Sets the global keypoll interval. The interval determines the speed of how often CE checks if a key has been pressed or not. Lower is more accurate, but eats more cpu power
setGlobalDelayBetweenHotkeyActivation(integer): Sets the minimum delay between the activation of the same hotey in milliseconds. Affects all hotkeys that do not set their own minimum delay

getXBox360ControllerState(ControllerID OPTIONAL) : table - Fetches the state of the connected xbox controller. Returns a table containing the following fields on success:
    ControllerID : The id of the controller (between 0 and 3)
    PacketNumber : The packet id of the state you see. (use to detect changes)
    GAMEPAD_DPAD_UP : D-PAD Up (boolean)
    GAMEPAD_DPAD_DOWN: D-PAD Down (boolean)
    GAMEPAD_DPAD_LEFT: D-PAD Left (boolean)
    GAMEPAD_DPAD_RIGHT: D-PAD Right (boolean)
    GAMEPAD_START: Start button (boolean)
    GAMEPAD_BACK: Back button (boolean)
    GAMEPAD_LEFT_THUMB: Left thumb stick down (boolean)
    GAMEPAD_RIGHT_THUMB: Right thumb stick down (boolean)

    GAMEPAD_LEFT_SHOULDER: Left shoulder button (boolean)
    GAMEPAD_RIGHT_SHOULDER: Right shoulder button (boolean)

    GAMEPAD_A: A button (boolean)
    GAMEPAD_B: B button (boolean)
    GAMEPAD_X: X button (boolean)
    GAMEPAD_Y: Y button (boolean)

    LeftTrigger: Left trigger (integer ranging from 0 to 255)
    RightTrigger: Right trigger (integer ranging from 0 to 255)

    ThumbLeftX: Horizontal position of the left thumbstick (-32768 to 32767)
    ThumbLeftY: Verital position of the left thumbstick (-32768 to 32767)
    ThumbRightX: Horizontal position of the right thumbstick (-32768 to 32767)
    ThumbRightY: Vertical position of the right thumbstick (-32768 to 32767)  


setXBox360ControllerVibration(ControllerID, leftMotor, rightMotor) - Sets the speed of the left and right vibrating motor inside the controller. Range (0 to 65535 where 0 is off)

connectToCEServer(hostname,port) - Connects to the given host and port. On success, most commands subsequent will be handled by the server. Like processlist, memory reading, etc...



undefined property functions. Not all properties of all classes have been explicitly exposed to lua, but if you know the name of a property of a specific class you can still access them (assuming they are declared as published in the pascal class declaration)
getPropertyList(class) : Returns a stringlist object containing all the published properties of the specified class (free the list when done) (Note, not all classed with properties have 'published' properties. E.g: stringlist)
setProperty(class, propertyname, propertyvalue) : Sets the value of a published property of a class (Won't work for method properties)
getProperty(class, propertyname) : Gets the value of a published property of a class (Won't work for method properties)
setMethodProperty(class, propertyname, function): Sets the method property to the specific function
getMethodProperty(Class, propertyname): Returns a function you can use to call the original function



registerSymbol(symbolname, address, OPTIONAL donotsave): Registers a userdefined symbol. If donotsave is true this symbol will not get saved when the table is saved
unregisterSymbol(symbolname)

getNameFromAddress(address,ModuleNames OPTIONAL=true, Symbols OPTIONAL=true, Sections OPTIONAL=false): Returns the given address as a string. Registered symbolname, modulename+offset, or just a hexadecimal string depending on what address
inModule(address) : returns true if the given address is inside a module
inSystemModule(address) : returns true if the given address is inside a system module
getCommonModuleList: Returns the commonModuleList stringlist. (Do not free this one)



AOBScan("aobstring", protectionflags OPTIONAL, alignmenttype OPTIONAL, alignmentparam HALFOPTIONAL):
protectionflags is a string.
  X=Executable W=Writable memory C=Copy On Write. Add a + to indicate that flag MUST be set and a - to indicate that that flag MUST NOT be set. (* sets it to don't care)
  Examples:
    +W-C = Writable memory exluding copy on write and doesn't care about the Executable flag
    +X-C-W = Find readonly executable memory
    +W = Finds all writable memory and don't care about copy on write or execute
    "" = Find everything (is the same as "*X*C*W" )


alignmenttype is an integer:
  0=No alignment check
  1=Address must be dividable by alignmentparam
  2=Address must end with alignmentparam
alignmentparam is a string which either holds the value the addresses must be dividable by or what the last digits of the address must be




-debugging

debug variables
EFLAGS
32/64-bit: EAX, EBX, ECX, EDX, EDI, ESI, EBP, ESP, EIP
64-bit only: RAX, RBX, RCX, RDX, RDI, RSI, RBP, RSP, RIP, R8, R9, R10, R11, R12, R13, R14, R15 : The value of the register


Debug related routines:
function debugger_onBreakpoint():
When a breaking breakpoint hits (that includes single stepping) and the lua function debugger_onBreakpoint() is defined it will be called and the global variables EAX, EBX, .... will be filled in
Return 0 if you want the userinterface to be updated and anything else if not (e.g: You continued from the breakpoint in your script)



createProcess(path, parameters OPTIONAL, debug OPTIONAL, breakonentrypoint OPTIONAL) : Creates a process. If debug is true it will be created using the windows debugger and if breakonentry is true it will cause a breakpoint to occur on entrypoint

debugProcess(interface OPT): starts the debugger for the currently opened process (won't ask the user) Optional interface: 0=default, 1=windows debug, 2=VEHDebug, 3=Kerneldebug

debug_isDebugging(): Returns true if the debugger has been started
debug_getCurrentDebuggerInterface() : Returns the current debuggerinterface used (1=windows, 2=VEH 3=Kernel, nil=no debugging active)
debug_canBreak(): Returns true if there is a possibility the target can stop on a breakpoint. 6.4+
debug_isBroken(): Returns true if the debugger is currently halted on a thread
debug_getBreakpointList(): Returns a lua table containing all the breakpoint addresses
debug_breakThread(threadid): Breaks the thread with the specific threadID (Note: The thread may not break instantly and may have to be awakened first)

debug_addThreadToNoBreakList(threadid): This will cause breakpoints on the provided thread to be ignored
debug_removeThreadFromNoBreakList(threadid): removed the threadid from the list

debug_setBreakpointForThread(threadid, address, size OPTIONAL, trigger OPTIONAL, breakpointmethod OPTIONAL, functiontocall() OPTIONAL) : sets a breakpoint of a specific size at the given address for the specified thread. if trigger is bptExecute then size is ignored. If trigger is ignored then it will be of type bptExecute, which obviously also ignores the size then as well.  (Other triggers are bptAccess and bptWrite)
debug_setBreakpoint(address, size OPTIONAL, trigger OPTIONAL, breakpointmethod OPTIONAL, functiontocall() OPTIONAL) 
debug_setBreakpoint(address, size OPTIONAL, trigger OPTIONAL, functiontocall() OPTIONAL) 
debug_setBreakpoint(address, functiontocall() OPTIONAL)
debug_removeBreakpoint(address) : if the given address is a part of a breakpoint it will be removed
debug_continueFromBreakpoint(continueMethod) : if the debugger is currently waiting to continue you can continue with this. Valid parameters are :co_run (just continue), co_stepinto(when on top of a call, follow it), co_stepover (when on top of a call run till after the call)
debug_getXMMPointer(xmmregnr) :
  Returns the address of the specified xmm register of the thread that is currently broken
  This is a LOCAL Cheat Engine address. Use Local memory access functions to read and modify
  xmmregnr can be 0 to 15 (0 to 7 on 32-bit)


The following routines describe last branch recording. These functions only work when kernelmode debugging is used and using windows XP (vista and later work less effective or not at all because the operating system interferes.  Might also be intel specific. A dbvm upgrade in the future might make this work for windows vista and later)
debug_setLastBranchRecording(boolean): When set the Kernel debugger will try to record the last branch(es) taken before a breakpoint happens
debug_getMaxLastBranchRecord() : Returns the maximum branch record your cpu can store (-1 if none)
debug_getLastBranchRecord(index): Returns the value of the Last Branch Record at the given index (when handling a breakpoint)


function debugger_onModuleLoad(modulename, baseaddress) :
this routine is called when a module is loaded. Only works for the windows debugger
return 1 if you want to cause the debugger to break


Changing registers:
When the debugger is waiting to continue you can change the register variables. When you continue those register values will be set in the thread's context


If the target is currently stopped on a breakpoint, but not done through an onBreakpoint function. The context won't be set.
You can get and set the context back with these functions before execution continues"
debug_getContext(BOOL extraregs) - Fills the global variables for the regular registers. If extraregs is true, it will also set FP0 to FP7 and XMM0 to XMM15
debug_setContext(BOOL extraregs)
debug_updateGUI() - Will refresh the userinterface to reflect the new context if the debugger was broken



detachIfPossible() : Detaches the debugger from the target process (if it was attached)

getComment(address) : Gets the userdefined comment at the specified address
setComment(address, text) : Sets a userdefined comment at the specifried address. %s is used to display the autoguess value if there is one
getHeader(address) : Gets the userdefined header at the specified address
setHeader(address) : Sets the userdefined header at the specified address

registerBinUtil(config) Registers a binutils toolset with CE (for assembling and disassembling in other cpu instruction sets)
config is a table containing several fields that describe the tools, and lets you specify extra parameters

Name : The displayed name in the binutils menu in memview
Description: The description for this toolset
Architecture: used by the objdump -m<architecture>  (required)
ASParam : extra parameters to pass on to AS (optional)
LDParam : extra parameters to pass on to LD
OBJDUMPParam: extra parameters to pass on to OBJDUMP
OnDisassemble: a lua function that gets called each time an address is disassembled. The return value will be passed on to OBJDUMP
Path: filepath to the binutils set
Prefix: prefix  (e.g: "arm-linux-androideabi-")
DisassemblerCommentChar: Depending on which target you're disassembling, the comment character  can be different. (ARM=";"  x86='#' )





class helper functions
inheritsFromObject(object): Returns true if given any class
inheritsFromComponent(object): Returns true if the given object inherits from the Component class
inheritsFromControl(object): Returns true if the given object inherits from the Control class
inheritsFromWinControl(object): Returns true if the given object inherits from the WinControl class

createClass(classname): Creates an object of the specified class (Assuming it's a registered class and has a default constructor)
createComponentClass(classname, owner): Creates an object of the specified component inherited class 


Class definitions
Object class: (Inheritance: )
Properties:
  ClassName: String - The name of class (Read only)
Methods:
  getClassName(): Returns the classname
  fieldAddress(fieldname: string): Returns the address of the specific field
  methodAddress(methodname: string)
  methodName(address: integer)
  destroy(): Destroys the object



Component Class: (Inheritance: Object)
properties
  ComponentCount: Integer - Number of child components . Readonly
  Component[int]: Component - Array containing the child components. Starts at 0. Readonly
  ComponentByName[string]: Component - Returns a component based on the name. Readonly
  Name: string - The name of the component
  Tag: integer - Free to use storage space. (Useful for id's)
  Owner: Component - Returns the owner of this object. Nil if it has none

methods
  getComponentCount() : Returns the number of components attached to his component
  getComponent(index) : Returns the specific component
  findComponentByName(name) : Returns the component with this name
  getName() : Return the name
  setName(newname) : Changes the name
  getTag() : Sets an integer value. You can use this for ID's
  setTag(tagvalue) : Get the tag value
  getOwner() : Returns the owner of this component



Control Class: (Inheritance: Component->Object)
properties:
  Caption: string - The text of a control
  Top : integer - The x position
  Left : integer - The y position
  Width : integer - The width of the control
  Height : integer - The height of the control
  ClientWidth: integer - The usable width inside the control (minus the borders)
  ClientHeight: integer - The usable height the control (minus the borders)
  Align: AlignmentOption - Alignment of the control
  Enabled: boolean - Determines if the object is usable or greyed out
  Visible: boolean - Determines if the object is visible or not
  Color: ColorDefinition/RGBInteger - The color of the object. Does not affect the caption
  RGBColor: RGBInteger - The color of the object in RGB formatting
  Parent: WinControl - The owner of this control
  PopupMenu: PopupMenu - The popup menu that shows when rightclicking the control
  Font: Font - The font class associated with the control
  OnClick: function(sender) - The function to call when a button is pressed
  OnChangeBounds:function(sender) - Called when the size or position of the control changes

methods:
  getLeft()
  setLeft(integer)
  getTop()
  setTop(integer)
  getWidth()
  setWidth(integer)
  getHeight()
  setHeight()
  setCaption(caption) : sets the text on a control. All the GUI objects fall in this category
  getCaption() : Returns the text of the control
  setPosition(x,y): sets the x and y position of the object base don the top left position (relative to the client array of the owner object)
  getPosition(): returns the x and y position of the object (relative to the client array of the owner object)
  setSize(width,height) : Sets the width and height of the control
  getSize() : Gets the size of the control
  setAlign(alignmentoption): sets the alignment of the control
  getAlign(alignmentoption): gets the alignment of the control
  getEnabled() : gets the enabled state of the control
  setEnabled(boolean) : Sets the enabled state of the control
  getVisible() : gets the visible state of the control
  setVisible(boolean) : sets the visible state of the control
  getColor() : gets the color
  setColor(rgb) : Sets the color
  getParent() : Returns nil or an object that inherits from the Wincontrol class
  setParent(wincontrol) : Sets the parent for this control
  getPopupMenu()
  setPopupMenu()
  getFont():  Returns the Font object of this object
  setFont():  Assigns a new font object. (Not recommended to use. Change the font object that's already there if you wish to change fonts)
  repaint(): Invalidates the graphical area of the control and forces and update
  update() : Only updates the invalidated areas
  setOnClick(functionnameorstring) : Sets the onclick routine
  getOnClick(): Gets the onclick function
  doClick():  Executes the current function under onClick
  bringToFront(): Changes the z-order of the control so it'd at the top
  sendToBack(): Changes the z-order of the control so it'd at the back
  screenToClient(x,y): Converts screen x,y coordinates to x,y coordinates on the control
  clientToScreen(x,y): Converts control x,y coordinates to screen coordinates

GraphicsObject : (GraphicsObject->Object)



Region Class : (Region->GraphicsObject->Object)
createRegion(): Created an empty region

properties
-
methods
  addRectangle(x1, y1, x2, y2): Adds a rectangle to the region
  addPolygon(tablewithcoordinates): Adds an array of 2D locations. (example : {{0,0},{100,100}, {0,100}} for a triangle )



WinControl Class: (Inheritance: Control->Component->Object)
properties
  Handle: Integer - The internal windows handle
  DoubleBuffered: boolean - Graphical updates will go to a offscreen bitmap which will then be shown on the screen instead of directly to the screen. May reduce flickering
  ControlCount : integer - The number of child controls of this wincontrol
  Control[] : Control - Array to access a child control
  OnEnter : function - Function to be called when the WinControl gains focus
  OnExit : function - Function to be called when the WinControl loses focus

methods
  getControlCount()  Returns the number of Controls attached to this class
  getControl(index) : Returns a WinControl class object
  getControlAtPos(x,y):  Gets the control at the given x,y position relative to the wincontrol's position
  canFocus(): returns true if the object can be focused
  focused(): returns boolean true when focused
  setFocus(): tries to set keyboard focus the object
  setShape(Region): Sets the region object as the new shape for this wincontrol
  setShape(Bitmap):
  setOnEnter(function) : Sets an onEnter event. (Triggered on focus enter)
  getOnEnter()
  setOnExit(function) : Sets an onExit event. (Triggered on lost focus)
  getOnExit()
  setLayeredAttributes(Key, Alpha, Flags) : Sets the layered state for the control if possible (Only Forms are supported in in windows 7 and earlier)
      flags can be a combination of LWA_ALPHA and/or LWA_COLORKEY
      See msdn SetLayeredWindowAttributes for more information




MenuItem class(Inheritance: Component->Object)
createMenuItem(ownermenu) : Creates a menu item that gets added to the owner menu

properties
  Caption : String - Text of the menu item
  Shortcut : string - Shortcut in textform to trigger the menuitem
  Count : integer - Number of children attached to this menuitem
  Menu: Menu - The menu this item resides in
  Parent: MenuItem - The menuitem this item hangs under
  MenuIndex: integer - The position this menu item is in it's parent
  ImageList: ImageList
  ImageIndex: integer - Which image of the attached ImageList to show
  Item[] : Array to access each child menuitem
  [] : Item[]
  OnClick: Function to call when the menu item is activated

methods
  getCaption() : Gets the caption of the menu item
  setCaption(caption) : Sets the caption of the menu item
  getShortcut(): Returns the shortcut for this menu item
  setShortcut(shortcut): Sets the shortcut for this menuitem. A shortcut is a string in the form of ("ctrl+x")
  getCount()
  getItem(index) : Returns the menuitem object at the given index
  add(menuitem) : Adds a menuItem as a submenu item
  insert(index, menuitem): Adds a menuItem as a submenu item at the given index
  delete(index)
  clear() - Deletes all children under this menuitem (frees the menu item, so it's gone)
  setOnClick(function) : Sets an onClick event
  getOnClick()
  doClick(): Executes the onClick method if one is assigned



Menu Class: (Inheritance: Component->Object)
properties
  Items : MenuItem - The base MenuItem class of this menu (readonly)
methods
  getItems() : Returns the main MenuItem of this Menu

MainMenu Class: (Inheritance: Menu->Component->Object)
createMainMenu(form)
  The mainmenu is the menu at the top of a window

PopupMenu Class: (Inheritance: Menu->Component->Object)
createPopupMenu(owner)
  The popup menu is the menu that pops up when showing the (rightclick) context of an control


Strings Class: (Inheritance : Object) (Mostly an abstract class)
properties
  LineBreak: String - the character(s) to count as a linebreak
  Text : String - All the strings in one string
  Count: Integer - The number of strings in this list
  String[]: String - Array to access one specific string in the list
  Data[]: Integer - Array to access the data of a specific string in the list
  [] = String[]

methods
  clear() : Deletes all strings in the list
  add(string, data:integer OPTIONAL) : adds a string to the list. Returns the index
  addText([[strings]]) : adds multiple strings at once
  delete(index) : Deletes a string from the list
  getText() : Returns all the strings as one big string
  setText(string) : Sets the strings of the given strings object to the given text (can be multiline)
  indexOf(string): Returns the index of the specified string. Returns -1 if not found
  insert(index, string): Inserts a string at a specific spot moving the items after it

  getCount(): Returns the number is strings in the list
  remove(string); Removes the given string from the list
  loadFromFile(filename, ignoreencoding OPTIONAL default true) : Load the strings from a textfile. If ignoreEncoding is false then the file will be loaded with the best encoding the loader can guess
  saveToFile(filename) : Save the strings to a textfile

  getString(index) : gets the string at the given index
  setString(index, string) : Replaces the string at the given index
  getData(index) : Returns the integer value stored in the string
  setData(index, integer): Sets the integer value stored in the string

  beginUpdate() : Stops updates from triggering other events (prevents flashing)
  endUpdate(): call after beginUpdate

ImageList Class: (Inheritance: )
List containing images.  Used by several components for images

createImageList(owner OPTIONAL): creates an imagelist object

properties
  Count: integer - Number of images in the list
  DrawingStyle: 'dsFocus', 'dsSelected', 'dsNormal', 'dsTransparent'
  Height: integer
  Width: integer
  Masked: boolean
  Scaled: boolean
  OnChange: function(sender)

methods
  add(bitmap, bitmapmask OPTIONAL):integer - Adds a new bitmap the list and returns the index of the newly added entry
  draw(canvas, x,y, index) - Draws the image at the index to the specific x,y coordinates on the canvas

Stringlist Class: (Inheritance : Strings->Object)
createStringlist() : Creates a stringlist class object (for whatever reason, lua strings are probably easier to use)

properties
  Sorted : boolean - Determines if the list should be sorted
  Duplicates : DuplicatesType - Determines how duplicates should be handled when the list is sorted
  CaseSensitive: boolean - Determines if the list is case sensitive or not.

methods
  getDuplicates() : returns the duplicates property
  setDuplicates(Duplicates) : Sets the duplicates property (dupIgnore, dupAccept, dupError)
  getSorted() : returns true if the list has the sorted property
  setSorted(boolean) : Sets the sorted property
  getCaseSensitive() : Returns true if the case sensitive property is set
  setCaseSensitive(boolean): Sets the case sensitive property

Application Class: (Inheritance: CustomApplication->Component->Object)
properties
  Title: The title of cheat engine in the bar
  Icon: The icon of Cheat Engine inn the bar

methods
  bringToFront(): Shows the cheat engine app
  processMessages()
  terminate()
  minimize()


Form Class: (Inheritance: ScrollingWinControl->CustomControl->WinControl->Control->Component->Object)
properties
  AllowDropFiles: boolean - Allows files to be dragged into the form
  ModalResult: integer - The current ModalResult value of the form. Note: When this value gets set the modal form will close
  Menu: MainMenu - The main menu of the form

  OnClose: function(sender) - The function to call when the form gets closed
  OnDropFiles: function(sender, {filenames}) - Called when files are dragged on top of the form. Filenames is an arraytable with the files
  FormState: FormState string ReadOnly - The current state of the form. Possible values: fsCreating, fsVisible, fsShowing, fsModal, fsCreatedMDIChild, fsBorderStyleChanged, fsFormStyleChanged, fsFirstShow, fsDisableAutoSize 


methods
  centerScreen(); : Places the form at the center of the screen
  hide() : Hide the form
  show() : show the form
  close():  Closes the form. Without an onClose this will be the same as hide
  bringToFront(): Brings the form to the foreground
  showModal() : show the form and wait for it to close and get the close result
  isForegroundWindow(): returns true if the specified form has focus
  setOnClose(function)  : function (sender) : Return a CloseAction to determine how to close the window
  getOnClose() : Returns the function
  getMenu() : Returns the mainmenu object of this form
  setMenu(mainmenu)

  setBorderStyle( borderstyle):  Sets the borderstyle of the window
  getBorderStyle()

  printToRasterImage(rasterimage): Draws the contents of the form to a rasterimage class object

  registerCreateCallback(function(f)): userdata - Registers a function to be called when the form has finished being created
  unregisterCreateCallback(userdata) - removes the specific callback
  registerFirstShowCallback(function(f)): userdata - Registers a function to be called when the form is show the first time
  unregisterFirstShowCallback(userdata) - removes the specific callback
  registerCloseCallback(function(f)): userdata - Registers a function to be called when the form has been closed
  unregisterCloseCallback(userdata) - removes the specific callback

  dragNow() -  Call this on mousedown on any object if you wish that the mousemove will drag the whole form arround. Useful for borderless windows (Dragging will stop when the mouse button is released)
  saveFormPosition({IntegerTable OPTIONAL}) - Saves the current form position and dimensions and an optional list of integer. The name of the form must have been set to a unique name
  loadFormPosition(): boolean, {IntegerTable OPTIONAL, can be nil} - Restores the form position and dimensions. On success returns true and a integer table if that was provided with the save.  The name of the form must have been set to a unique name


CEForm Class: (Inheritance: Form->ScrollingWinControl->CustomControl->WinControl->Control->Component->Object)
createForm(visible OPT): creates a CEForm class object(window) and returns the pointer for it. Visible is default true but can be changed
createFormFromFile(filename): Returns the generated CEform

properties
  DoNotSaveInTable: boolean - Set this if you do not wish to save the forms in the table
methods
  saveToFile(filename): Saves a userdefined form
  getDoNotSaveInTable(): Returns the DoNotSaveInTable property
  setDoNotSaveInTable(boolean): Sets the DoNotSaveInTable property
  saveCurrentStateAsDesign() : Sets the current state of the form as the state that will be saved when the table is saved


TfrmLuaEngine class: (Inheritance: Form->ScrollingWinControl->CustomControl->WinControl->Control->Component->Object)
getLuaEngine() : Returns the main lua engine form object (Creates it if needed)
createLuaEngine() : Creates a new lua engine form object. If there is no main luaengine window, this will become it. 

properties
  mOutput: Memo - Output of the luaengine window
  mScript: SynEdit - Editor for the script

methods


TfrmAutoInject class: (Inheritance: Form->ScrollingWinControl->CustomControl->WinControl->Control->Component->Object)
createAutoAssemblerForm(script: string OPTIONAL): TFrmAutoInject - Spawns an autoassembler window with the optionally provided script

properties
  Assemblescreen: SynEdit - Editor for the script
  TabCount: integer
  TabScript[index]: string

methods
  addTab(): integer
  deleteTab(index)

GraphicControl Class: (Inheritance: Control->Component->Object)
properties
  Canvas: Canvas - The canvas for rendering this control

methods
  getCanvas() : Returns the Canvas object for the given object that has inherited from customControl


PaintBox class: (Inheritance: GraphicControl->Control->Component->Object)
createPaintBox(owner): Creates a Paintbox class object


Label Class: (Inheritance: GraphicControl->Control->Component->Object)
createLabel(owner): Creates a Label class object which belongs to the given owner. Owner can be any object inherited from WinControl


Splitter Class: (Inheritance: CustomControl->WinControl->Control->Component->Object)
createSplitter(owner): Creates a Splitter class object which belongs to the given owner. Owner can be any object inherited from WinControl


Panel Class: (Inheritance: CustomControl->WinControl->Control->Component->Object)
createPanel(owner): Creates a Panel class object which belongs to the given owner. Owner can be any object inherited from WinControl

properties
  Alignment: alignment
  BevelInner: panelBevel
  BevelOuter: panelBevel
  BevelWidth: Integer
  FullRepaint: boolean
methods
  getAlignment() : gets the alignment property
  setAlignment(alignment) : sets the alignment property
  getBevelInner()
  setBevelInner(PanelBevel)
  getBevelOuter()
  setBevelOuter(PanelBevel)
  getBevelWidth()
  setBevelWidth(BevelWidth)
  getFullRepaint()
  setFullRepaint(boolean)



Image Class: (Inheritance: GraphicControl->Control->Component->Object)
createImage(owner): Creates an Image class object which belongs to the given owner. Owner can be any object inherited from WinControl

properties
  Canvas: Canvas - The canvas object to access the picture of the image
  Transparent: boolean - Determines if some parts of the picture are see through (usually based on the bottomleft corner)
  Stretch: boolean - Determines if the picture gets stretched when rendered in the image component
  Picture: Picture - The picture to render

methods
  loadImageFromFile(filename)
  getStretch()
  setStretch(boolean)
  getTransparent()
  setTransparent(boolean)
  getCanvas()
  setPicture(picture)
  getPicture() : Returns the Picture object of this image


Edit Class: (Inheritance: WinControl->Control->Component->Object)
createEdit(owner): Creates an Edit class object which belongs to the given owner. Owner can be any object inherited from WinControl

properties
  Text: string - The current contents of the editfield
  CaretPos: Point - The posaition of the caret
  PasswordChar: string[1] - When not set to char0 this will make the edit field show the character instead of the given text
  SelText: string - The current selected contents of the edit field 
  SelStart: number - The starting index of the current selection (zero-indexed)
  SelLength: number - The length of the current selection. 
  OnChange: function - The function to call when the editfield is changed
  OnKeyPress: function - The function to call for the KeyPress event.
  OnKeyUp: function - The function to call for the KeyUp event.
  OnKeyDown: function - The function to call for the KeyDown event.

methods
  clear()
  copyToClipboard()
  cutToClipboard()
  pasteFromClipboard()
  selectAll()
  select(start, length OPTIONAL)
  selectText(start, length OPTIONAL) : Set the control's current selection. If no length is specified, selects everything after start.
  clearSelection()
  getSelText()
  getSelStart()
  getSelLength()
  getOnChange()
  setOnChange(function)
  getOnKeyPress()
  setOnKeyPress(function)
  getOnKeyUp()
  setOnKeyUp(function)
  getOnKeyDown()
  setOnKeyDown(function)


Memo Class: (Inheritance: Edit->WinControl->Control->Component->Object)
createMemo(owner): Creates a Memo class object which belongs to the given owner. Owner can be any object inherited from WinControl

properties
  Lines: Strings - Strings object for this memo
  WordWrap: boolean - Set if words at the end of the control should go to the next line
  WantTabs: Boolean - Set if tabs will add a tab to the memo. False if tab will go to the next control
  WantReturns: Boolean - Set if returns will send a event or not
  Scrollbars: Scrollstyle - Set the type of ascrollbars to show (ssNone, ssHorizontal, ssVertical, ssBoth,
    ssAutoHorizontal, ssAutoVertical, ssAutoBoth)


methods
  append(string)
  getLines() : returns a Strings class
  getWordWrap()
  setWordWrap(boolean)
  getWantTabs()
  setWantTabs(boolean)
  getWantReturns()
  setWantReturns(boolean)
  getScrollbars()
  setScrollbars(scrollbarenumtype) :
  Sets the scrollbars. Horizontal only takes affect when wordwrap is disabled
  valid enum types:
    ssNone : No scrollbars
    ssHorizontal: Has a horizontal scrollbar
    ssVertical: Has a vertical scrollbar
    ssBoth: Has both scrollbars
    ssAutoHorizontal: Same as above but only shows when there actually is something to scroll for
    ssAutoVertical: " " " " ...
    ssAutoBoth: " " " " ...


SynEdit class: 
createSynEdit(owner,mode OPTIONAL): Creates a synedit object. mode: 0=Lua highlighting, 1=Auto Assembler highlighting
properties
  Lines: Stringlist - Contains the text
  Gutter: Gutter - Gutter object
  ReadOnly: Boolean - Set to true for read only
  SelStart: integer
  SelEnd: integer
  SelText: string
  CanPaste: boolean
  CanRedo: boolean
  CanUndo: boolean
  CharWidth: integer READONLY
  LineHeight: integer READONLY

methods
  CopyToClipboard()
  CutToClipboard()
  PasteFromClipboard()
  ClearUndo()
  Redo()
  Undo()
  MarkTextAsSaved()
  ClearSelection();
  SelectAll();     

ButtonControl Class: (Inheritance: WinControl->Control->Component->Object)


Button Class: (Inheritance: ButtonControl->WinControl->Control->Component->Object)
createButton(owner): Creates a Button class object which belongs to the given owner. Owner can be any object inherited from WinControl

properties
  ModalResult: ModalResult - The result this button will give the modalform when clicked

methods
  getModalResult(button)
  setModalResult(button, mr)

CheckBox Class: (Inheritance: ButtonControl->WinControl->Control->Component->Object)
createCheckBox(owner): Creates a CheckBox class object which belongs to the given owner. Owner can be any object inherited from WinControl

properties
  Checked: boolean - True if checked
  AllowGrayed: boolean - True if it can have 3 states. True/False/None
  State: checkboxstate - The state. (cbUnchecked=0, cbChecked=1, cbGrayed=2)
  OnChange: function - Function to call when the state it changed

methods
  getAllowGrayed()
  setAllowGrayed(boolean)
  getState(): Returns a state for the checkbox. (cbUnchecked, cbChecked, cbGrayed)
  setState(boolean): Sets the state of the checkbox
  onChange(function)

ToggleBox Class: (Inheritance: CheckBox->ButtonControl->WinControl->Control->Component->Object)
createToggleBox(owner): Creates a ToggleBox class object which belongs to the given owner. Owner can be any object inherited from WinControl

GroupBox Class: (Inheritance: WinControl->Control->Component->Object)
createGroupBox(owner): Creates a GroupBox class object which belongs to the given owner. Owner can be any object inherited from WinControl


RadioGroup class: (Inheritance: GroupBox->WinControl->Control->Component->Object)
createRadioGroup(owner): Creates a RadioGroup class object which belongs to the given owner. Owner can be any object inherited from WinControl

properties
  Items: Strings - Strings derived object containings all the items in the list
  Columns: Integer - The number of columns to split the items into
  ItemIndex: Integer - The currently selected item
  OnClick: Called when the control is clicked

methods
  getRows(): Returns the number of rows
  getItems(): Returns a Strings object
  getColumns(): Returns the nuber of columns
  setColumns(integer)
  getItemIndex()
  setItemIndex(integer)
  setOnClick(function)
  getOnClick()


ListBox Class: (Inheritance: WinControl->Control->Component->Object)
createListBox(owner): Creates a ListBox class object which belongs to the given owner. Owner can be any object inherited from WinControl

properties
  MultiSelect: boolean - When set to true you can select multiple items
  Items: Strings - Strings derived object containings all the items in the list
  Selected[] - Returns true if the given line is selected. Use Items.Count-1 to find out the max index
  ItemIndex: integer - Get selected index. -1 is nothing selected
  Canvas: Canvas - The canvas object used to render on the object

methods
  clear()
  clearSelection() : Deselects all items in the list
  selectAll(): Selects all items in the list
  getItems(): Returns a strings object
  setItems(Strings): sets a strings object to the listbox
  getItemIndex()
  setItemIndex(integer)
  getCanvas()


Calendar Class: (Inheritance: WinControl->Control->Component->Object)
createCalendar(owner): Creates a Calendar class object which belongs to the given owner. Owner can be any object inherited from WinControl. Valid date is between "September 14, 1752" and "December 31, 9999"

properties
  Date: string - current date of the Calendar, format: yyyy-mm-dd
  DateTime: number - days since December 30, 1899

methods
  getDateLocalFormat - returns current date of the Calendar, format: ShortDateFormat from OS local settings


ComboBox Class: (Inheritance: WinControl->Control->Component->Object)
createComboBox(owner): Creates a ComboBox class object which belongs to the given owner. Owner can be any object inherited from WinControl

properties
  Items: Strings - Strings derived object containings all the items in the list
  ItemIndex: integer - Get selected index. -1 is nothing selected
  Canvas: Canvas - The canvas object used to render on the object

methods
  clear()
  getItems()
  setItems()
  getItemIndex()
  setItemIndex(integer)
  getCanvas()
  getExtraWidth() : Returns the number of pixels not part of the text of the combobox (think about borders, thumb button, etc...)




ProgressBar Class: (Inheritance: WinControl->Control->Component->Object)
createProgressBar(owner): Creates a ProgressBar class object which belongs to the given owner. Owner can be any object inherited from WinControl

properties
  Min: integer - The minimum positionvalue the progressbar can have (default 0)
  Max: integer - The maximum positionvalue the progressbar can have (default 100
  Position: integer - The position of the progressbar
  Step: integer- The stepsize to step by when stepIt() is called

methods
  stepIt() - Increase position with "Step" size
  stepBy(integer) - increase the position by the given integer value
  getMax() - returns the Max property
  setMax(integer) - sets the max property
  getMin() - returns the min property
  setMin(integer)- sets the min property
  getPosition() - returns the current position
  setPosition(integer) - sets the current position
  setPosition2(integer) - sets the current position; without slow progress animation on Win7 and later




TrackBar Class : (Inheritance: WinControl->Control->Component->Object)
createTrackBar(owner): Creates a TrackBar class object which belongs to the given owner. Owner can be any object inherited from WinControl

properties
  Min: integer - Minimal value for the trackbar
  Max: integer - Maximum value for the trackbar
  Position: integer - The current position
  OnChange: function - Function to call when

methods
  getMax()
  setMax(integer)
  getMin(trackbar)
  setMin(trackbar, integer)
  getPosition(progressbar)
  setPosition(progressbar, integer)
  getOnChange()
  setOnChange(function)


CollectionItem Class: (Inheritance: Object)
Base class for some higher level classes. Often used for columns

properties
  ID: integer
  Index: integer - The index in the array this item belong to
  DisplayName: string

methods
  getID()
  getIndex()
  setIndex()
  getDisplayName()
  setDisplayName()





ListColumn class: (Inheritance: CollectionItem->Object)
properties
  AutoSize: boolean
  Caption: string
  MaxWidth: integer
  MinWidth: integer
  Width: integer
  Visible: boolean
methods
  getAutosize()
  setAutosize(boolean)
  getCaption()
  setCaption(caption)
  getMaxWidth()
  setMaxWidth(width)
  getMinWidth()
  setMinWidth(width)
  getWidth()
  setWidth(width)


Collection Class: (Inheritance: Object)

properties
  Count: integer

methods
  clear(collection)
  getCount(collection)
  delete(collection, index)


ListColumns class : (Inheritance: Collection->Object)
properties
  Columns[]: Array to access a column
  [] = Columns[]

methods
  add(): Returns a new ListColumn object
  getColumn(index): Returns a ListColum object;
  setColumn(index, listcolumns): Sets a ListColum object (not recommended, use add instead)

ListItem Class : (Inheritance: TObject)
properties
  Caption: boolean - The text of this listitem
  Checked: boolean - Determines if the checkbox is checked (if it has a checkbox)
  SubItems: Strings - The Strings object that hold the subitems
  Selected: boolean - Returns true if selected
  Index: integer - The index in the Items object of the owner of this listitem (readonly)
  ImageIndex: integer - The index in the attached imagelist (LargeImages/SmallImages)
  StateIndex: integer - The index in the attached imagelist (StateImages)
  Owner: ListItems - The ListItems object that owns this ListItem (readonly)
  Data: integer - Read/Write value up to the user to implement

methods
  delete()
  getCaption() : Returns the first columns string of the listitem
  setCaption(string) : Sets the first column string of the listitem
  getChecked() : Returns true if the listitem is checked
  setChecked(boolean): Sets the checkbox of the listbox to the given state
  getSubItems(): Returns a Strings object
  makeVisible(partial): Scrolls the listview so this item becomes visible (Cheat Engine 6.4 and later)
  displayRect(code): returns the displayed rectangle of the listitem. code can be: drBounds(0), drIcon(1), drLabel(2), drSelectBounds(3)
  displayRectSubItem(code): returns the displayed rectangle of the listitem. code can be: drBounds(0), drIcon(1), drLabel(2), drSelectBounds(3)


ListItems class : (Inheritance: TObject)
properties
  Count : Integer - The number of ListItems this object holds (Normally read only, but writable if OwnerData is true in the listview)
  Item[]: ListItem[] - Array to access each ListItem object
  [] = Item[]
methods
  clear()
  getCount()
  getItem(integer) : Return the listitem object at the given index
  add(): Returns a new ListItem object



Listview Class : (Inheritance: WinControl->Control->Component->Object)
createListView(owner): Creates a ListView class object which belongs to the given owner. Owner can be any object inherited from WinControl

properties
  Columns: ListColumns - The Listcolumns object of the listview (Readonly)
  Items: ListItems - The ListItems objects of the listview
  ItemIndex: integer - The currently selected index in the Items object  (-1 if nothing is selected)
  Selected: ListItem - The currently selected listitem (nil if nothing is selected)
  Canvas: Canvas - The canvas object used to render the listview  (Readonly)
  AutoWidthLastColumn: Boolean - When set to true the last column will resize when the control resizes
  HideSelection: Boolean - When set to true the selection will not hide when the focus leaves the control
  RowSelect: Boolean - When set to true the whole row will be selected instead of just the first column
  OwnerData: Boolean - When set to true the listview will call the onData function for every line being displayed. Use Items.Count to set the number of virtual lines
  LargeImages: ImageList
  SmallImages: ImageList
  StateImages: ImageList

  OnData: function(sender, ListItem) - Called when a listview with OwnerData true renders a line

  OnCustomDraw: function(Sender, {Top, Left, Bottom, Right}, DefaultDraw Optional): NewDefaultDraw
  OnCustomDrawItem: function(Sender, ListItem, {cdsSelected=true/false(nil), cdsGrayed=true/false(nil), cdsDisabled, cdsChecked, cdsFocused, cdsDefault, cdsHot, cdsMarked, cdsIndeterminate}, DefaultDraw Optional): NewDefaultDraw
  OnCustomDrawSubItem: function(Sender, ListItem, SubItemIndex, {cdsSelected=true/false(nil), cdsGrayed=true/false(nil), cdsDisabled, cdsChecked, cdsFocused, cdsDefault, cdsHot, cdsMarked, cdsIndeterminate}, DefaultDraw Optional): NewDefaultDraw


methods
  clear()
  getColumns() : ListColumns - Returns a ListColumns object
  getItemAt(x,y):ListItem - Returns the ListItem at the given index. nil if nothing
  getItems(): ListItems - Returns a ListItems object
  getItemIndex(): integer -  Returns the currently selected index in the Items object
  setItemIndex(index: integer)- Sets the current itemindex
  getCanvas() : Canvas - Returns the canvas object used to render the listview
  beginUpdate() - Tells the listview to stop updating while you're busy
  endUpdate() - Applies all updates between beginUpdate and endUpdate


HeaderSection class : (Inheritance: CollectionItem)
properties
  Alignment: string - 'taLeftJustify', 'taRightJustify', 'taCenter'
  ImageIndex: imageindex
  MaxWidth: integer
  MinWidth: integer
  Text: String - The text of the headersection
  Width: integer - The width of the headersection
  Visible: boolean - Determines if the headersection is visible
  OriginalIndex: integer - The original index ignoring user reorganization (READONLY)
methods


HeaderSections class : (Inheritance: Collection->TObject)
properties
methods
  add(): THeaderSection - Adds a new header and returns it
  insert(index): THeaderSection - inserts a new header at the index and returns it
  delete(index) - deletes(and frees) the headersection at the given index


TreeNode class : (Inheritance: TObject)
properties
  Text: string - The text of the treenode
  Parent: Treenode - The treenode this object is a child of. (can be nil) (ReadOnly)
  Level: Integer - The level this node is at
  HasChildren: boolean - Set to true if it has children, or you wish it to have an expand sign
  Expanded: boolean - Set to true if it has been expanded
  Count : Integer - The number of children this node has
  Items[]: Treenode - Array to access the child nodes of this node
  [] = Items[]
  Index: Integer - The index based on the parent
  AbsoluteIndex: Integer - The index based on the TreeView's Treenodes object (Items)
  Selected: Boolean - Set to true if currently selected
  MultiSelected: Boolean - Set to true if selected as well, but not the main selected object
  Data: Pointer - Space to store 4 or 8 bytes depending on which version of CE is used
methods
  delete()
  deleteChildren()
  makeVisible()
  expand(recursive:boolean=TRUE OPTIONAL) : Expands the given node
  collapse(recursive:boolean=TRUE OPTIONAL)  : collapses the given node
  getNextSibling(): Returns the treenode object that's behind this treenode on the same level
  getDisplayRect(TextOnly: Boolean=FALSE OPTIONAL): Returns a rect {Left,Top,Right,Bottom} describing the node
  add(text:string): Returns a Treenode object that is a child of the treenode used to create it




TreeNodes class : (Inheritance: TObject)
properties
  Count : Integer - The total number of Treenodes this object has
  Item[]: TreeNode - Array to access each node
  [] = Item[]
methods
  clear()
  getCount()
  getItem(integer) : Return the TreeNode object at the given index (based on the TreeView's Treenodes)
  add(text:string): Returns a new root Treenode object
  insert(treenode, string): Returns a new treenode object that has been inserted before the given treenode
  insertBehind(treenode, string): Returns a new treenode object that has been inserted after the given treenode



Treeview Class : (Inheritance: CustomControl->WinControl->Control->Component->Object)
createTreeView(owner)

properties
  Items: TreeNodes - The Treenodes object of the treeview (ReadOnly)
  Selected: TreeNode - The currently selected treenode

methods
  beginUpdate()
  endUpdate()
  getItems()
  getSelected()
  setSelected()
  fullCollapse()  : Collapses all the nodes, including the children's nodes
  fullExpand() : Expands all the nodes and all their children
  saveToFile(filename): Saves the contents of the treeview to disk



Timer Class : (Inheritance: Component->object)
createTimer(delay, function(...),...):
  Creates a timer object that waits the given delay, executes the given function, and then selfdestructs.  Tip: Don't use the timer after it has ran

createTimer(owner OPT, enabled OPT):
  Creates a timer object. If enabled is not given it will be enabled by default (will start as soon as an onTimer event has been assigned)
  Owner may be nil, but you will be responsible for destroying it instead of being the responsibility of the owner object)

properties
  Interval: integer - The number of milliseconds (1000=1 second) between executions
  Enabled: boolean
  OnTimer: function(timer) - The function to call when the timer triggers

methods
  getInterval()
  setInterval(interval) : Sets the speed on how often the timer should trigger. In milliseconds (1000=1 second)
  getOnTimer()
  setOnTimer(function(timer))
  getEnabled()
  setEnabled(boolean)

CustomControl class (CustomControl->WinControl->Control->Component->Object)
properties
  Canvas : The canvas object for drawing on the control/. Readonly
  OnPaint: an OnPaint event you can assign to do some extra painting
methods
  getCanvas() : Returns the Canvas object for the given object that has inherited from customControl


Canvas Class : (Inheritance: CustomCanvas->Object)
properties
  Brush: Brush - The brush object
  Pen: Pen - The pen object
  Font: Font - The font object
  Width: integer - Width of the canvas
  Height: integer - Height of the canvas
  Handle: integer - DC handle of the canvas



methods
  getBrush(): Returns the brush object of this canvas
  getPen(): Returns the pen object of this canvas
  getFont(): Returns the font object of this canvas
  getWidth()
  getHeight()
  getPenPosition()
  setPenPosition(x,y)
  clear() - Clears the canvas

  line(sourcex, sourcey, destinationx, destinationy)
  lineTo(destinationx, destinationy)
  moveTo(destinationx, destinationy)
  rect(x1,y1,x2,y2) - Draws a rectangle
  fillRect(x1,y1,x2,y2) - Draws a filled rectangle
  roundRect(x1,y1,x2,y2,rx,ry) - Draws a rectangle with rounded corners
  drawFocusRect(x1,y1,x2,y2) - Draws the focus rectangle shape
  textOut(x,y, text)
  textRect(rect,x,y,text): write the text within the given rectangle. The text supports some ansi escape characters
  getTextWidth(text)
  getTextHeight(text)
  getPixel(x,y)
  setPixel(x,y,color)
  floodFill(x,y, color OPTIONAL default=brush.Color, filltype OPTIONAL default=fsSurface): Fills the picture till/with a color.  
    filltype can be 
      fsSurface: fill till the color (it fills all except this color)        
      fsBorder:  fill this color (it fills only connected pixels of this color)      


  ellipse(x1,y1,x2,y2)
  gradientFill(x1,y1,x2,y2, startcolor, stopcolor, direction) : Gradient fills a rectangle. Direction can be 0 or 1. 0=Vertical 1=Horizontal
  copyRect(dest_x1,dest_y1,dest_x2,dest_y2, sourceCanvas, source_x1,source_y1,source_x2,source_y2) : Draws an image from one source to another. Useful in cases of doublebuffering
  strectDraw(rect
  draw(x,y, graphic) : Draw the image of a specific Graphic class
  stretchDraw(rect, graphic): Draw the image of a specific Graphic class and stretch it so it fits in the given rectangle
  getClipRect() : Returns a table containing the fields Left, Top, Right and Bottom, which define the invalidated region of the graphical object. Use this to only render what needs to be rendered in the onPaint event of objects

Pen Class : (Inheritance: CustomPen->CanvasHelper->Object)
properties
  Color: Integer - The color of the pen
  Width: integer - Thickness of the pen
methods
  getColor()
  setColor(color)
  getWidth()
  setWidth(width)


Brush Class : (Inheritance: CustomBrush->CanvasHelper->Object)
properties
  Color : Integer
methods
  getColor()
  setColor()

Font Class : (Inheritance: CustomFont->CanvasHelper->Object)
createFont(): Returns a font object (default initialized based on the main ce window)

properties
  Name: string
  Size: integer
  Height: integer
  Orientation: integer
  Pitch: string - 'fpDefault', 'fpVariable', 'fpFixed'
  Color: integer
  CharSet: integer
  Quality: string - 'fqDefault', 'fqDraft', 'fqProof', 'fqNonAntialiased', 'fqAntialiased', 'fqCleartype', 'fqCleartypeNatural' 
  Style: string set - ['fsBold', 'fsItalic', 'fsStrikeOut', 'fsUnderline']

methods
  getName(): Gets the fontname of the font
  setName(string): Sets the fontname of the font
  getSize(): Gets the size of the font
  setSize(integer): Sets the size of the font
  getColor(): Gets the color of the font
  setColor(integer): Sets the color of the font
  assign(font): Copies the contents of the font given as parameter to this font


Graphic Class : (Inheritance: Object) : Abstract class
properties
  Width: integer
  Height: integer
  Transparent: boolean

methods
  getWidth(graphic): Gets the current width in pixels of this graphics object
  setWidth(graphic, width): Sets thw width in pixels
  getHeight(graphic)
  setHeight(graphic, height)
  loadFromFile(filename)
  saveToFile(filename)

RasterImage class: (Inheritance: Graphic->Object) : Base class for some graphical controls
properties
  Canvas: Canvas
  PixelFormat: PixelFormat - the pixelformat for this image. Will clear the current image if it had one. Supported pixelformats: pf1bit, pf4bit, pf8bit, pf15bit, pf16bit, pf24bit, pf32bit (recommended)
  TransparentColor: integer

methods
  getCanvas(): Returns the Canvas object for this image
  getPixelFormat():  Returns the current pixelformat
  getPixelFormat(pixelformat):  Sets the pixelformat for this image. Will clear the current image if it had one. Supported pixelformats: pf1bit, pf4bit, pf8bit, pf15bit, pf16bit, pf24bit, pf32bit (recommended)
  setTransparentColor(integer): Sets the color that will be rendered as transparent when drawn
  getTransparentColor():  Returns the color set to be transparent
  saveToStream(stream) : Saves the image to a stream object
  loadFromStream(stream): Loads the image from a stream object



Bitmap class: (Inheritance: CustomBitmap->RasterImage->Graphic->Object) : Bitmap based Graphic object
createBitmap(width, height) - Returns a Bitmap object

PortableNetworkGraphic Class: (Inheritence: CustomBitmap->RasterImage->Graphic->Object)
createPNG(width, height) - Returns a PortableNetworkGraphic object

JpegImage Class: (Inheritence: CustomBitmap->RasterImage->Graphic->Object)
createJpeg(width, height) - Returns a Jpeg object

Icon Class: (Inheritence: CustomBitmap->RasterImage->Graphic->Object)
createIcon(width, height) - Returns an Icon object


Picture Class : (Inheritance: Object) : Container for the Graphic class
createPicture() : Returns a empty picture object

properties
  Graphic
  PNG
  Bitmap
  Jpeg
  Icon

methods
  loadFromFile(filename)
  saveToFile(filename)
  loadFromStream(stream, originalextension OPTIONAL) : Loads a picture from a stream. Note that the stream position must be set to the start of the picture
  assign(sourcepicture)


GenericHotkey Class : (Inheritance:  Object)
createHotkey(function, keys, ...) : returns an initialized GenericHotkey class object. Maximum of 5 keys
createHotkey(function, {keys, ...}) : ^

properties
  DelayBetweenActivate: integer - Interval in milliseconds that determines the minimum time between hotkey activations. If 0, the global delay is used
  onHotkey: The function to call when the hotkey is pressed

methods
  getKeys()
  setKeys(key, ....)
  setOnHotkey(table)
  getOnHotkey


CommonDialog class: (Inheritance: CommonDialog->Component->Object)
  properties
    OnShow: function(sender)
    OnClose: function(sender)
    Title: string - The caption at top of the dialog
  methods
    Execute() : Shows the dialog and return true/false depending on the dialog

ColorDialog class: 
createColorDialog(owner OPTIONAL) - Creates a new colordialog
properties
  property Color: integer - The currently selected color
  property CustomColors: TStrings - List of custom colors ( entry looks like ColorA = FFFF00 ... ColorX = C0C0C0 ) 

methods

ColorBox class:
  Combobox like component where you can pick a color

createColorBox(owner) - Creates a new colorbox



FindDialog Class: (Inheritance: CommonDialog->Component->Object)
createFindDialog(owner)

properties
  Top
  Left
  Width
  Height
  FindText: String - The text the user wishes to find
  Options: Enum - Find Options
                   { frDown, frFindNext, frHideMatchCase, frHideWholeWord,
                     frHideUpDown, frMatchCase, frDisableMatchCase, frDisableUpDown,
                     frDisableWholeWord, frReplace, frReplaceAll, frWholeWord, frShowHelp,
                     frEntireScope, frHideEntireScope, frPromptOnReplace, frHidePromptOnReplace }
  OnFind: function (sender) - Called when the find button has been clicked
  OnHelp: function (sender) - Called when the help button is visible (see Options) and clicked
methods


FileDialog Class: (Inheritance: CommonDialog->Component->Object)

properties

  DefaultExt: string - When not using filters this will be the default extention used if no extension is given
  Files: Strings - Stringlist containing all selected files if multiple files are selected
  FileName: string - The filename that was selected
  Filter: string - A filter formatted string
  FilterIndex: integer - The index of which filter to use

  InitialDir: string - Sets the folder the filedialog will show first
methods



OpenDialog Class: (Inheritance: FileDialog->CommonDialog->Component->Object)
createOpenDialog(owner) : Creates an opendialog object

properties
  Options: String
    A string formatted as "[param1, param2, param3]" to set OpenDialogs options
    Valid parameters are:
      ofReadOnly,
      ofOverwritePrompt  : if selected file exists shows a message, that file will be overwritten
      ofHideReadOnly     : hide read only file
      ofNoChangeDir      : do not change current directory
      ofShowHelp         : show a help button
      ofNoValidate
      ofAllowMultiSelect : allow multiselection
      ofExtensionDifferent
      ofPathMustExist    : shows an error message if selected path does not exist
      ofFileMustExist    : shows an error message if selected file does not exist
      ofCreatePrompt
      ofShareAware
      ofNoReadOnlyReturn : do not return filenames that are readonly
      ofNoTestFileCreate
      ofNoNetworkButton
      ofNoLongNames
      ofOldStyleDialog
      ofNoDereferenceLinks : do not expand filenames
      ofEnableIncludeNotify
      ofEnableSizing     : dialog can be resized, e.g. via the mouse
      ofDontAddToRecent  : do not add the path to the history list
      ofForceShowHidden  : show hidden files
      ofViewDetail       : details are OS and interface dependent
      ofAutoPreview      : details are OS and interface dependent


methods
-


SaveDialog Class: (Inheritance: OpenDialog->FileDialog->CommonDialog->Component->Object)
createSaveDialog(owner)

SelectDirectoryDialog Class: (Inheritance: OpenDialog->FileDialog->CommonDialog->Component->Object)
createSelectDirectoryDialog(owner)


Stream Class

properties
  Size: integer
  Position: integer

methods
  copyFrom(stream, count) - Copies count bytes from the given stream to this stream
  read(count): bytetable - Returns a bytetable containing the bytes of the stream. This increases the position
  write(bytetable, count OPTIONAL)- Writes the given bytetable to the stream
  readByte(): integer
  writeByte(integer)
  readWord(): integer
  writeWord(integer)
  readDword(): integer
  writeDword(integer)
  readQword(): integer
  writeQword(integer)
  readAnsiString(): string
  writeAnsiString(string)


MemoryStream Class (Inheritance: Stream->Object)
createMemoryStream()

properties
  Memory: Integer - The address in Cheat Engine's memory this stream is loaded (READONLY, tends to change on size change)

methods
  loadFromFile(filename) : Replaces the contents in the memory stream with the contents of a file on disk
  saveToFile(filename) : Writes the contents of the memory stream to the specified file
  loadFromFileNoError(filename):boolean,string - Replaces the contents in the memory stream with the contents of a file on disk. On success returns true, else false with a secondary return the error message
  saveToFileNoError(filename):boolean,string - Writes the contents of the memory stream to the specified file. On success returns true, else false with a secondary return the error message



FileStream Class (Inheritance: HandleStream->Stream->Object)
createFileStream(filename, mode)  - 
  Creates a filestream object.  mode can be fmCreate(0xff00), fmOpenRead, fmOpenWrite or fmOpenReadWrite and can be or-ed with
  fmShareCompat(0x0000), fmShareExclusive(0x0010), fmShareDenyWrite(0x0020), fmShareDenyRead(0x0030) or fmShareDenyNone(0x0040)


StringStream Class (Inheritance: Stream->Object)
createStringStream(string)

properties
DataString: The internal string


TableFile class (Inheritance: Object)
findTableFile(filename): Returns the TableFile class object for the saved file
createTableFile(filename, filepath OPTIONAL): TableFile - Add a new file to your table. If no filepath is specified, it will create a blank file. Otherwise, it will read the contents from disk.

properties
  Name: string
  Stream: MemoryStream

methods
  delete() : Deletes this file from your table.
  saveToFile(filename)
  getData() : Gets a MemoryStream object


xmplayer class
The xmplayer class has already been defined as xmplayer, no need to create it manually

properties
  IsPlaying : boolean - Indicator that the xmplayer is currently playing a xm file
  Initialized: boolean - Indicator that the xmplayer is actually actively loaded in memory

methods
  setVolume(int)
  playXM(filename, OPTIONAL noloop)
  playXM(tablefile, OPTIONAL noloop)
  playXM(Stream, OPTIONAL noloop)
  pause()
  resume()
  stop()


CheatComponent Class: (Inheritance: WinControl->Control->Component->Object)
The cheatcomponent class is the component used in Cheat Engine 5.x trainers
Most people will probably want to design their own components but for those that don't know much coding and use the autogenerated trainer this will be used

properties
  Color: Integer - background color
  Textcolor: integer - text color
  Activationcolor: integer - The textcolor to show when activated is true
  Activated: boolean - Toggles between the ActivationColor and the TextColor
  Editleft:integer - The x position of the optional edit field
  Editwidth: integer - the width of the optional edit field
  Editvalue:string - The string of the optional edit field
  Hotkey:string read - The hotkeypart of the cheat line
  Description:string - Description part of the cheat line
  Hotkeyleft: integer - The x position of the hotkey line
  Descriptionleft:integer - The x position of the Description line


  ShowHotkey: boolean - Decides if the hotkey label should be shown
  HasEditBox: boolean - Decides if the editbox should be shown
  HasCheckbox: boolean - Decides if the checkbox should be shown
  Font: Font - The font to use to render the text

methods
 -



MemoryRecordHotkey Class: (Inheritance: object)
The memoryrecord hotkey class is mainly readonly with the exception of the event properties to be used to automatically create trainers
Use the generic hotkey class if you wish to create your own hotkeys

properties
  Owner: MemoryRecord - The memoryrecord this hotkey belongs to (ReadOnly)
  Keys: Table - Table containing the keys(combination) for this hotkey
  action: integer - The action that should happen when this hotkey triggers
      mrhToggleActivation(0): Toggles between active/deactive
      mrhToggleActivationAllowIncrease(1): Toggles between active/deactive. Allows increase when active
      mrhToggleActivationAllowDecrease(2): Toggles between active/deactive. Allows decrease when active
      mrhActivate(3): Sets the state to active
      mrhDeactivate(4):  Sets the state to deactive
      mrhSetValue(5):  Sets a specific value to the value properyy (see value)
      mrhIncreaseValue(6):  Increases the current value with the value property (see value)
      mrhDecreaseValue(7):  Decreases the current value with the value property (see value)
  value: string - Value used depending on what kind of hotkey is used
  ID: integer - Unique id of this hotkey (ReadOnly)
  Description: string - The description of this hotkey  
  HotkeyString: string - The hotkey formatted as a string (ReadOnly)
  ActivateSound: string - Tablefile name of a WAV file inside the table which will get played on activate events
  DeactivateSound: string - Tablefile name of a .WAV file inside the table which will get played on deactivate events
  OnHotkey: function(sender) - Function to be called when a hotkey has just been pressed
  OnPostHotkey: function(sender) - Function to be called when a hotkey has been pressed and the action has been performed


methods
  doHotkey: Executes the hotkey as if it got triggered by the keyboard


MemoryRecord Class:
The memoryrecord objects are the entries you see in the addresslist

properties
  ID: Integer - Unique ID
  Index: Integer - The index ID for this record. 0 is top. (ReadOnly)
  Description: string- The description of the memory record
  Address: string - Get/set the interpretable address string. Useful for simple address settings.
  AddressString: string - Get the address string shown in CE (ReadOnly)
  OffsetCount: integer - The number of offsets. Set to 0 for a normal address
  Offset[] : integer - Array to access each offset
  OffsetText[] : string - Array to access each offset using the interpretable text style

  CurrentAddress: integer - The address the memoryrecord points to
  VarType: ValueType (string) - The variable type of this record. See vtByte to vtCustom
  Type: ValueType (number) - The variable type of this record. See vtByte to vtCustom
    If the type is vtString then the following properties are available:
     String.Size: Number of characters in the string
     String.Unicode: boolean
     String.Codepage: boolean

    If the type is vtBinary then the following properties are available
      Binary.Startbit: First bit to start reading from
      Binary.Size : Number of bits

    If the type is vtByteArray then the following properties are available
      Aob.Size : Number of bytes

  CustomTypeName: String - If the type is vtCustom this will contain the name of the CustomType
  Script: String - If the type is vtAutoAssembler this will contain the auto assembler script
  Value: string - The value in stringform.
  NumericalValue: number - The value in numerical form.  nil if it can not be parsed to a number
  Selected: boolean - Set to true if selected (ReadOnly)
  Active: boolean - Set to true to activate/freeze, false to deactivate/unfreeze
  Color: integer
  ShowAsHex: boolean - Self explanatory
  ShowAsSigned: boolean - Self explanatory
  AllowIncrease: boolean - Allow value increasing, unfreeze will reset it to false
  AllowDecrease: boolean - Allow value decreasing, unfreeze will reset it to false
  Collapsed: boolean - Set to true to collapse this record or false to expand it. Use expand/collapse methods for recursive operations. 
  IsGroupHeader: boolean - Set to true if the record was created as a Group Header with no address or value info. 
  IsAddressGroupHeader: boolean - Set to true if the record was created as a Group Header with address.
  IsReadable: boolean - Set to false if record contains an unreadable address. NOTE: This property will not be set until the value property is accessed at least once. (ReadOnly)

  Options: String set - a string enclosed by square brackets filled with the options seperated by a comma. Valid options are: moHideChildren, moActivateChildrenAsWell, moDeactivateChildrenAsWell, moRecursiveSetValue, moAllowManualCollapseAndExpand, moManualExpandCollapse, moAlwaysHideChildren
  
  DropDownLinked: boolean - if dropdown list refers to list of another memory record eg. (memrec name)
  DropDownLinkedMemrec: string - Description of linked memrec or emptystring if not linked
  DropDownList : StringList - list of "value:description" lines, lists are still separate objects when linked, read-write
  DropDownReadOnly: boolean - true if 'Disallow manual user input' is set
  DropDownDescriptionOnly: boolean - self explanatory
  DisplayAsDropDownListItem: boolean - self explanatory
  DropDownCount: integer - equivalent to .DropDownList.Count
  DropDownValue[index] : Array to access values in DropDownList (ReadOnly)
  DropDownDescription[index] : Array to access Descriptions in DropDownList (ReadOnly)



  Count: Number of children
  Child[index] : Array to access the child records
  [index] = Child[index]
  Parent: MemoryRecord - The parent of the memory record

  HotkeyCount: integer - Number of hotkeys attached to this memory record
  Hotkey[] : Array to index the hotkeys

  Async: Boolean - Set to true if activating this entry will be asynchronious. (only for AA/Lua scripts)
  AsyncProcessing: Boolean - True when async is true and it's being processed
  AsyncProcessingTime: qword - The time that it has been processing in milliseconds

  HasMouseOver: boolean - True if the mouse is currently over it

  OnActivate: function(memoryrecord,before,currentstate):boolean - The function to call when the memoryrecord will change (or changed) Active to true. If before is true, not returning true will cause the activation to stop.
  OnDeactivate: function(memoryrecord,before,currentstate):boolean - The function to call when the memoryrecord will change (or changed) Active to false. If before is true, not returning true will cause the deactivation to stop.
  OnDestroy: function() - Called when the memoryrecord is destroyed.
  OnGetDisplayValue: function(memoryrecord,valuestring):boolean,string - This function gets called when rendering the value of a memory record. Return true and a new string to override the value shown
  DontSave: boolean - Don't save this memoryrecord and it's children

methods
  getDescription()
  setDescription()
  getAddress() : Returns the interpretable addressstring of this record. If it is a pointer, it returns a second result as a table filled with the offsets
  setAddress(string) : Sets the interpretable address string, and if offsets are provided make it a pointer

  getOffsetCount(): Returns the number of offsets for this memoryrecord
  setOffsetCount(integer): Lets you set the number of offsets

  getOffset(index) : Gets the offset at the given index
  setOffset(index, value) : Sets the offset at the given index

  getCurrentAddress(): Returns the current address as an integer (the final result of the interpretable address and pointer offsets)

  appendToEntry(memrec): Appends the current memory record to the given memory record

  getHotkey(index): Returns the hotkey from the hotkey array
  getHotkeyByID(integer): Returns the hotkey with the given id

  reinterpret()
  createHotkey({keys}, action, value OPTIONAL, description OPTIONAL): Returns a hotkey object 

  disableWithoutExecute(): Sets the entry to disabled without executing the disable section
  beginEdit() : Call when you wish to take a long time to edit a record. (e.g external editor) It prevents the record from getting deleted
  endEdit() : to mark the end of your long edit sequence

global events
  function onMemRecPreExecute(memoryrecord, newstate BOOLEAN):
    If above function is defined it will be called before action* has been performed.
    Active property is about to change to newState.
  
  function onMemRecPostExecute(memoryrecord, newState BOOLEAN, succeeded BOOLEAN):
    If above function is defined it will be called after action*.
    Active property was supposed to change to newState.
    If 'succeeded' is true it means that Active state has changed and is newState.
    
    newState and succeeded are read only.
  
    *action can be: running auto assembler script (ENABLE or DISABLE section), freezing and unfreezing.
  


Addresslist Class: (Inheritance: Panel->WinControl->Control->Component->Object)
properties
  Count: Integer - The number of records in the table
  SelCount: integer- The number of records that are selected
  SelectedRecord: MemoryRecord - The main selected record
  MemoryRecord[]: MemoryRecord - Array to access the individial memory records
  [] = MemoryRecord - Default accessor

  CheckboxActiveSelectedColor: color
  CheckboxActiveColor: color
  CheckboxSelectedColor: color
  CheckboxColor: color
  SelectedBackgroundColor: color
  SelectedSecondaryBackgroundColor: color
  ExpandSignColor: color
  IncreaseArrowColor: color
  DecreaseArrowColor: color

  MouseHighlightedRecord() : Returns the memoryrecord that the mouse points at. nil if nothing


  OnDescriptionChange: function(addresslist,memrec):boolean - called when the user initiates a description column change on a record. Return true if you handle it, false for normal behaviour
  OnAddressChange: function(addresslist,memrec):boolean - called when the user initiates an address column change on a record. Return true if you handle it, false for normal behaviour
  OnTypeChange: function(addresslist,memrec):boolean - called when the user initiates a type column change on a record. Return true if you handle it, false for normal behaviour
  OnValueChange: function(addresslist,memrec):boolean - called when the user initiates a value column change on a record. Return true if you handle it, false for normal behaviour
  OnAutoAssemblerEdit: function(addresslist,memrec) - Called when the user initiates a memoryrecord AA script edit.  This function will be responsible for changing the memory record


methods
  getCount()
  getMemoryRecord(index)
  getMemoryRecordByDescription(description): returns a MemoryRecord object
  getMemoryRecordByID(ID)
  createMemoryRecord() : creates an generic cheat table entry and add it to the list

  getSelectedRecords():  Returns a table containing all the selected records

  doDescriptionChange() : Will show the GUI window to change the description of the selected entry
  doAddressChange() : Will show the GUI window to change the address of the selected entry
  doTypeChange() : Will show the GUI window to change the type of the selected entries
  doValueChange() : Will show the GUI window to change the value of the selected entries

  getSelectedRecord() : Gets the main selected memoryrecord
  setSelectedRecord(memrec) : Sets the currently selected memoryrecord. This will unselect all other entries

  disableAllWithoutExecute(): Disables all memory records without executing their [Disable] section
  rebuildDescriptionCache(): Rebuilds the description to record lookup table


MemScan Class (Inheritance: Object)
getCurrentMemscan() : Returns the current memory scan object. If tabs are used the current tab's memscan object
createMemScan(progressbar OPTIONAL) : Returns a new MemScan class object

properties
  LastScanWasRegionScan: boolean - returns true is the previous scan was an unknown initial value
  LastScanValue: string
  LastScanType: ScanType/string - 'stNewScan', 'stFirstScan', 'stNextScan'
  ScanresultFolder: string - Path where the results are stored  
  OnScanDone: function(memscan) - Set a function to be called when the scan has finished
  OnGuiUpdate: function(memscan, TotalAddressesToScan, CurrentlyScanned, ResultsFound) - Called during the scan so you can update the interface if needed
  FoundList: FoundList - The foundlist currently attached to this memscan object
  OnlyOneResult: boolean - If this is set to true memscan will stop scanning after having found the first result, and written the address to "Result"
  IsUnique: boolean - Same as OnlyOneResult but will use multiple threads, so if the value is not unique you will be given a random address
  Result: Integer - If OnlyOneResult is used this will contain the address after a scan has finished

  CodePage: boolean;
  ScanOption: TScanoption 
  VariableType: TVariableType
  VarType: TVariableType : ^
  Roundingtype: TRoundingType
  Scanvalue: string : Value to scan
  Scanvalue1: string : ^
  Scanvalue2: string : Secondary value to scan (e.g value between scan)
  Startaddress: integer
  Stopaddress: integer
  Hexadecimal: boolean 
  BinaryStringAsDecimal: boolean
  UTF16: boolean 
  Casesensitive: boolean 
  Fastscanmethod: TFastScanMethod 
  Fastscanparameter: string
  Customtype: TCustomType

  ScanWritable:    TScanregionpreference ('scanDontCare', 'scanExclude', 'scanInclude')
  ScanExecutable:  TScanregionpreference ('scanDontCare', 'scanExclude', 'scanInclude') 
  ScanCopyOnWrite: TScanregionpreference ('scanDontCare', 'scanExclude', 'scanInclude')
  
  Percentage: boolean
  CompareToSavedScan: boolean 
  SavedScanName: string

methods
  scan(): Does either a first scan or next scan based on the given property values
  firstScan() : Does a first scan based on the given property values
  nextScan() : Does a next scan based on the given property values
  newScan() : Clears the current results

  firstScan(scanoption, vartype, roundingtype, input1, input2 ,startAddress ,stopAddress ,protectionflags ,alignmenttype ,"alignmentparam" ,isHexadecimalInput ,isNotABinaryString, isunicodescan, iscasesensitive);
    Does an initial scan.
    memscan: The MemScan object created with createMemScan
    scanOption: Defines what type of scan is done. Valid values for firstscan are:
      soUnknownValue: Unknown initial value scan
      soExactValue: Exact Value scan
      soValueBetween: Value between scan
      soBiggerThan: Bigger than ... scan
      soSmallerThan: smaller than ... scan

    vartype: Defines the variable type. Valid variable types are:
      vtByte
      vtWord  2 bytes
      vtDword 4 bytes
      vtQword 8 bytes
      vtSingle float
      vtDouble
      vtString
      vtByteArray
      vtGrouped
      vtBinary
      vtAll

    roundingtype: Defined the way scans for exact value floating points are handled
      rtRounded : Normal rounded scans. If exact value = "3" then it includes 3.0 to 3.49999999. If exact value is "3.0" it includes 3.00 to 3.0499999999
      rtTruncated: Truncated algorithm. If exact value = "3" then it includes 3.0 to 3.99999999. If exact value is "3.0" it includes 3.00 to 3.099999999
      rtExtremerounded: Rounded Extreme. If exact value = "3" then it includes 2.0000001 to 3.99999999. If exact value is "3.0" it includes 2.900000001 to 3.099999999

    input1: If required by the scanoption this is a string of the given variable type
    input2: If requires by the scanoption this is the secondary input

    startAddress : The start address to scan from. You want to set this to 0
    stopAddress  : The address the scan should stop at. (You want to set this to 0xffffffffffffffff)

    protectionflags : See aobscan about protectionflags
    alignmenttype : Scan alignment type. Valid options are:
      fsmNotAligned : No alignment check
      fsmAligned    : The address must be dividable by the value in alignmentparam
      fsmLastDigits : The last digits of the address must end with the digits provided by alignmentparam

    alignmentparam : String that holds the alignment parameter.

    isHexadecimalInput: When true this will handle the input field as a hexadecimal string else decimal
    isNotABinaryString: When true and the varType is vtBinary this will handle the input field as a decimal instead of a binary string
    isunicodescan: When true and the vartype is vtString this will do a unicode (utf16) string scan else normal utf8 string
    iscasesensitive : When true and the vartype is vtString this check if the case matches




  nextScan(scanoption, roundingtype, input1,input2, isHexadecimalInput, isNotABinaryString, isunicodescan, iscasesensitive, ispercentagescan, savedresultname OPTIONAL);
    Does a next scan based on the current addresslist and values of the previous scan or values of a saved scan
    memscan: The MemScan object that has previously done a first scan
    scanoption:
      soExactValue: Exact Value scan
      soValueBetween: Value between scan
      soBiggerThan: Bigger than ... scan
      soSmallerThan: smaller than ... scan
      soIncreasedValue: Increased value scan
      soIncreasedValueBy: Increased value by scan
      soDecreasedValue: Decreased value scan
      soDecreasedValueBy: Decreased value by scan
      soChanged: Changed value scan
      soUnchanged: Unchanged value scan

    roundingtype: Defined the way scans for exact value floating points are handled
      rtRounded : Normal rounded scans. If exact value = "3" then it includes 3.0 to 3.49999999. If exact value is "3.0" it includes 3.00 to 3.0499999999
      rtTruncated: Truncated algoritm. If exact value = "3" then it includes 3.0 to 3.99999999. If exact value is "3.0" it includes 3.00 to 3.099999999
      rtExtremerounded: Rounded Extreme. If exact value = "3" then it includes 2.0000001 to 3.99999999. If exact value is "3.0" it includes 2.900000001 to 3.099999999

    input1: If required by the scanoption this is a string of the given variable type
    input2: If requires by the scanoption this is the secondary input

    isHexadecimalInput: When true this will handle the input field as a hexadecimal string else decimal
    isNotABinaryString: When true and the varType is vtBinary this will handle the input field as a decimal instead of a binary string
    isunicodescan: When true and the vartype is vtString this will do a unicode (utf16) string scan else normal utf8 string
    iscasesensitive : When true and the vartype is vtString this check if the case matches
    ispercentage: When true and the scanoption is of type soValueBetween, soIncreasedValueBy or soDecreasedValueBy will cause CE to do a precentage scan instead of a normal value scan
    savedResultName: String that holds the name of a saved result list that should be compared against. First scan is called "FIRST"


  waitTillDone() : Waits for the memscan thread(s) to finish scanning. Always use this
  saveCurrentResults(name) : Save the current scanresults to a unique name for this memscan. This save can be used to compare against in a subsequent next scan
  getAttachedFoundlist() : Returns a FoundList object if one is attached to this scanresults. Returns nil otherwise


  setOnlyOneResult(state): If set to true before you start a scan, this will cause the scanner to only return one result. Note that it does not work with a foundlist
  getOnlyResult(): Only works if returnOnlyOneResult is true. Returns nil if not found, else returns the address that was found (integer)
  getProgress(): returns a table with fields: TotalAddressesToScan, CurrentlyScanned, ResultsFound


FoundList Class
The foundlist is an object that opens the current memscan's result file and provides an interface for reading out the addresses

createFoundList(memscan)

properties
  Count: integer - Number of results found
  Address[index] : string - Returns the address as a string at the given index
  Value[index]: string - Returns the value as a string at the given index
  [index]: string - Same as Address

methods
  initialize() : Call this when a memscan has finished scanning. This will open the results for reading
  deinitialize() : Release the results
  getCount()
  getAddress(index) : Returns the address as a string
  getValue(index) : Returns the value as a string


Memoryview class: (Inheritance: Form->ScrollingWinControl->CustomControl->WinControl->Control->Component->Object)
createMemoryView() - Creates a new memoryview window. This window will not receive debug events. Use getMemoryViewForm() function to get the main memoryview window
properties
  DisassemblerView: The disassemblerview class of this memoryview object
  HexadecimalView: The hexadecimalview class of this memoryview object
methods
  -

DisassemblerviewLine class: (Inheritance: Object)
properties
  Address: The current address of this line
  Owner: The Disassemblerview that owns this line
  OnDisassemblerViewOverride: Called when a line is about to be rendered
    funtion(address, addressstring, bytestring, opcodestring, parameterstring, specialstring)
      return addressstring, bytestring, opcodestring, parameterstring, specialstring
    end    

methods
  -

Disassemblerview class: (Inheritance: Panel->CustomControl->WinControl->Control->Component->Object)
  The visual disassembler used on the memory view window
properties
  SelectedAddress: integer - The currently selected address in the disassemblerview
  SelectedAddress2: integer - The secondary selected address in the disassemblerview
  TopAddress: Integer - The first address to show
  ShowJumplines: boolean - Determines if the jumplines should be shown
  HideFocusRect: boolean - If set to true the focus rectangle won't be shown
  SpaceAboveLines: integer
  SpaceBelowLines: integer
  OnSelectionChange: function(sender, address, address2) - Function to call when the selection has changed
  OnExtraLineRender: function(sender, Address, AboveInstruction, Selected): RasterImage OPTIONAL, x OPTIONAL, y OPTIONAL
    Function to call when you wish to provide the disassembler view with an extra image containing data you wish to show.
    This function is called once to get an image to show above the instruction, and once to get an image to show under the instruction and optional comments.
    The image for both calls must be different objects as rendering will only be done when both calls have been completed

    Sender is a DisassemblerviewLine object
    If no coordinates are given the image will be centered above/below the instruction

  Osb: Bitmap : Background picture of the disasemblerview


methods
  -


Hexadecimal class: (Inheritance: Panel->CustomControl->WinControl->Control->Component->Object)
  The visual hexadecimal object used on the memory view window
properties
  Address: integer - The top address
  HasSelection: boolean - True if something is selected
  SelectionStart: integer
  SelectionStop: integer
  DisplayType: displaytype - The type being shown: dtByte, dtByteDec, dtWord, dtWordDec, dtDword, dtDwordDec, dtQword, dtQwordDec, dtSingle, dtDouble
  OnAddressChange(hexadecimalview, function): function(hexadecimalview, address)
  OnByteSelect(hexadecimalview, function): function(hexadecimalview, address, address2)
  OnCharacterRender: function(sender, address, text) return text end - Called when a character is being rendered. Use this to change it or change the canvas fonts (Warning: slow)
  OnValueRender: function(sender, address, text) return text end - Called when a value (depending on the displaytype) is being rendered. Use this to change it or change the canvas fonts (Warning: slow)

methods
  -


Thread Class: (Inheritance: Object)
createThread(function(Thread,...), ...) :
  Executes the given function in another thread using the systems thread mechanism
  The function returns the Thread class object
  function declaration: function (Thread, ...)

createThreadSuspended(function(Thread,...), ...) :
  Same as createNativeThread but it won't run until resume is called on it

createThreadNewState(scripttext): Creates a new thread in a new lua state. This is more efficient as no locking inside lua takes place, but has no access to userdefined lua functions and only limited base CE functions. called inside a function(t) where t is the thread.  Watch for t.Terminated to quit.  Notice: Unlike createThread, the created thread does not freeOnTerminate so you can read out the "Result" property which will be set on thread finish


properties
  Name: string - This name will be shown when the thread terminated abnormally
  Finished: boolean - Returns true if the thread has reached the end.  Do not rely on this if the thread is freeOnTerminate(true) (which is the default)
  Terminated: boolean - Returns true if the Terminate method has been called
  Result: string - The result of the thread function as a string

methods
  freeOnTerminate(state) :
    When set to true the thread object will free itself when the function ends (default=true)
    Note: Use this only from inside the thread function as the thread might have already terminated and freed itself when called

  synchronize(function(thread, ...), ...) :
    Called from inside the thread. This wil cause the tread to get the main thread to execute the given function and wait for it to finish.
    Usually for GUI access
    Returns the return value of the given function

  waitfor() :
    Waits for the given thread to finish (Not recommended to call this from inside the thread itself)

  suspend() :
    Suspend the thread's execution

  resume() :
    Resume the thread's execution

  terminate() :
    Tells the thread it should terminate. The Terminated property will become true


CriticalSection class: (Inheritance: Object)
createCriticalSection(): Returns a critical section object

properties
-

methods
  enter()
  leave()
  tryEnter(): Returns true if entered, false if not


Event class: (Inheritance: Object)
createEvent(ManualReset, InitialState): Returns an event object

properties
-

methods
  resetEvent()
  setEvent()
  waitFor(timeout): Waits for the event to be set. Returns wrSignaled(0), wrTimeout(1), wrAbandoned(2) or wrError(3);  


Semaphore class: (Inheritance: Object)
createSemaphore(count): Returns an semaphore object
properties
-

methods
  acquire()
  release()


MultiReadExclusiveWriteSynchronizer class: (Inheritance: Object)
createMultiReadExclusiveWriteSynchronizer(): Returns a createMultiReadExclusiveWriteSynchronizer

properties
-

methods
  beginWrite()
  endWrite()
  beginRead()
  endRead()




StructureFrm class:
createStructureForm(address, groupname OPTIONAL, structurename OPTIONAL)
enumStructureForms() : returns a table of StructureFrm objects (can be useful for finding a structure window with the wanted structure)


properties:
MainStruct: structure - The currently selected structure

ColumnCount: integer - the number of columns (columns=address)
Column[index]: structColumn - Fetches a structColumn object from the structure form

GroupCount: integer - The number of groups
Group[index]: structGroup - Fetches a structGroup object from the structure form
OnStatusbarUpdate(function(notificationbar)) - Called when the statusbar gets updated



methods:
structChange() : Forces a refresh
addColumn(): Adds a new column in the currently focuses group and returns it's structColumn object
addGroup(): Adds a new group and returns the structGroup object

structColumn class:
properties:
Address: integer - The current address
AddressText: string - Gets/sets the visual address
Focused: boolean - Gets/sets the focused state 

methods:
focus(): focuses the current column


structGroup class:
properties:
name: string - gets the current name
box: Groupbox - Gets the groupbox object
columnCount: integer- Gets the number of columns in the group
columns[index]: structColumn - Returns the specific structColumn object


methods:
addColumns(): Adds a new columns to the specific group and returns it's structColumn objecy




Structure class related functions:
getStructureCount(): Returns the number of Global structures. (Global structures are the visible structures)
getStructure(index): Returns the Structure object at the given index
createStructure(name): Returns an empty structure object (Not yet added to the Global list. Call structure.addToGlobalStructureList manually)
createStructureFromName(string): If PDB files are loaded this will create a structure with that name if it can be found



structure class: (Inheritance: Object)
Properties:
  Name: String - The name of the structure
  Size: Integer - The number of bytes between the last element and the start. ReadOnly
  Count: Integer - Number of elements in the structure. ReadOnly
  Element[]: structureElement - Returns the structure element at the given index. Readonly
Methods:
  getName(): Returns the name
  setName(name): Sets the name
  getElement(index): Returns a structureElement object (Changing offsets can change the index)
  getElementByOffset(offset): Returns a structureElement object where the specified offset is at least the requested offset
  addElement(): Adds a new blank structureElement and returns it
  autoGuess(baseaddresstoguessfrom, offset, size)
  fillFromDotNetAddress(address, changeName): Fills the structure with the layout gathered from querying .NET.  If changeName is true, the structure will take the name of the .NET class.  (6.4+)

  beginUpdate(): Call this when you want to make multiple updates to a structure. It will speed up the update process
  endUpdate(): Call this when done
  addToGlobalStructureList(): Add this to the list of structures for the user to select from. (Global structures will get saved to the table)
  removeFromGlobalStructureList(): Remove from the list of structures.


StructureElement class: (Inheritance: Object)
Properties:
  Owner: structure - The structure this element belongs to. Readonly
  Offset: integer - The offset of this element
  Name: string - The name of this element
  Vartype: integer - The variable type of this element
  ChildStruct: structure - If not nil this element is a pointer to the structure defined here
  ChildStructStart: integer - The number of bytes inside the provided childstruct. (E.g: It might point to offset 10 of a certain structure)
  Bytesize: integer - The number of bytes of this element. Readonly for basic types, writable for types that require a defined length like strings and array of bytes

Methods:
  getOwnerStructure(): Returns the structure this element belongs to
  getOffset(): Returns the offset of this element
  setOffset(offset): Sets the offset of this element
  getName(): Returns the name of this element
  setName(name): Sets the name of this element (tip: Leave blank if you only want to set the name of the variable)
  getVartype(): Returns the variable type of this element (check Variable types in defines.lua)
  setVartype(vartype)
  getValue(address) : Gets the memory from the specified address and interprets it according to the element type
  setValue(address,value): Sets the memory at the specified address to the interpreted value according to the element type
  getValueFromBase(baseaddress): same as getValue but uses the offset to calculate the final address
  setValueFromBase(baseaddress,value): same as setValue but uses the offset to calculate the final address
  getChildStruct()
  setChildStruct(structure)
  getChildStructStart()
  setChildStructStart(offset)
  getBytesize(): Gets the bytesize of the element. Usually returns the size of the type, except for string and aob
  setBytesize(size): sets the bytesize for types that are affected (string, aob)





supportCheatEngine(attachwindow, hasclosebutton, width, height, position ,yoururl OPTIONAL, extraparameters OPTIONAL, percentageshown OPTIONAL):
  Will show an advertising window which will help keep the development of Cheat Engine going.
  If you provide your own url it will be shown Up to 75% of the time.

  attachwindow: Type=Form : The form that the ad is attached to
  hasclosebutton: Type=boolean : If true the window will have a border an a close button at top
  width, height: Type=integer :
    The client width and height of the window.
    Prefered formats are : 120x600 , 160x600, 300x250, 468x60, 728x90  ,But you are free to use different formats

  Position: Type=integer/enum: The place of the window
    0=Top, 1=Right, 2=Bottom, 3=left

  Yoururl: Type=string: The url you want to show. When given instead of showing CE's ads 100% it will show your url up to 75%.
    You can use it for your own income, or for updating users about new versions of your trainer or whatever you feel like

  Extraparameters: Type=String :  are url request parameters you can add to the default parameters (e.g trainername=mytrainer for tracking purposes)

  PercentageShown: You can change the default of 75% to a smaller value like 50%


fuckCheatEngine() : Removes the ad window if it was showing


Following are some more internal functions for Cheat Engine

dbk_initialize() : Returns true if the dbk driver is loaded in memory. False if it failed for whatever reason (e.g 64-bit and not booted with unsigned driver support)
dbk_useKernelmodeOpenProcess() : Switches the internal pointer of the OpenProcess api to dbk_OpenProcess
dbk_useKernelmodeProcessMemoryAccess() : Switches the internal pointer to the ReadProcessMemory and WriteProcessMemory apis to dbk_ReadProcessMemory and dbk_WriteProcessMemory
dbk_useKernelmodeQueryMemoryRegions() : Switches the internal pointer to the QueryVirtualMemory api to dbk_QueryVirtualMemory
dbk_usePhysicalMemoryAccess() : Changes all memory access to physical memory
dbk_setSaferPhysicalMemoryScanning(state: BOOLEAN): When set to true CE's memory scanner will skip hardware device owned memory. Default state is true
dbk_readPhysicalMemory(address, size): bytetable
dbk_writePhysicalMemory(address, size): boolean
dbk_getPEProcess(processid) : Returns the pointer of the EProcess structure of the selected processid
dbk_getPEThread(threadid) : Gets the pointer to the EThread  structure

dbk_readMSR(msr): Reads the msr
dbk_writeMSR(msr, msrvalue): Writes the msr 
dbk_executeKernelMemory(address, parameter) :
  Executes a routine from kernelmode (e.g a routine written there with auto assembler)
  parameter can be a value or an address. It's up to your code how it's handled


dbvm_initialize(offloados:Boolean OPTIONAL, reason:String OPTIONAL) : Initializes the dbvm functions (dbk_initialize also calls this) offloados is a boolean that when set will offload the system onto dbvm if it's not yet running (and only IF the dbk driver is loaded)
dbvm_addMemory(pagecount): Adds memory to DBVM (one page is 4096 bytes)
dbvm_readMSR(msr): See dbk_readMSR but then using dbvm
dbvm_writeMSR(msr, value): See dbk_writeMSR
dbvm_getCR4(): Returns the real Control Register 4 state

dbvm_readPhysicalMemory(address, size): bytetable
dbvm_writePhysicalMemory(address, bytetable)

dbvm_watch_writes(PhysicalAddress, bytesize OPTIONAL, OPTIONS OPTIONAL,  internalentrycount OPTIONAL) : 
  Starts watching writes to the given address range
  OPTIONS is a binary field.
    (1 << 0): Log the same RIP multiple times (if different registers)
    (1 << 1): Ignore the size field and log everything in the specified page
    (1 << 2): Logs record the floating point state
    (1 << 3): Logs contain a 4KB stack snapshot
    (1 << 4): does nothing
    (1 << 5): If the number of recorded entries gets bigger than internalentrycount, grow the list instead of discarding the entries

  On success returns an ID to use with dbvm_watch_retrievelog and dbvm_watch_disable


dbvm_watch_reads(PhysicalAddress, bytesize OPTIONAL, OPTIONS OPTIONAL,  internalentrycount OPTIONAL) : see dbvm_watch_writes but then for reads and writes
dbvm_watch_retrievelog(ID) : Returns an array of watch event data. (Context of the system at the time of the event, like registers)
dbvm_watch_disable(ID) : Disables the watch operation


dbvm_cloak_activate(physicalbase, virtualbase OPTIONAL): 
  Hides an executable memory range (4096 bytes) from snooping eyes
  Note: It is recommended to cause a copy-on-write on the target first, else this will affect all processes that have this memory block loaded
dbvm_cloak_deactivate(physicalbase): Disables the cloak and restores the executable memory to what the system thinks it is
dbvm_cloak_readOriginal(physicalbase): Reads the memory that will get executed.  On success returns a 4096 byte long bytetable starting from the base of the page (remember, lua indexes start at 1, so offset 0 is index 1)
dbvm_cloak_writeOriginal(physicalbase, bytetable[4096]): Writes the memory that will get executed. 

dbvm_changeregonbp(physicaladdress, changereginfo, virtualaddress OPTIONAL): boolean
  sets a breakpoint at the given position. When a breakpoint hits the registers will be changed according to the changereginfo table
    changereginfo table:  (set the field to nil, or don't define it, if you don't want to change it)
      newCF: integer/boolean (false=0, true=1) 
      newPF: integer/boolean (false=0, true=1) 
      newAF: integer/boolean (false=0, true=1) 
      newZF: integer/boolean (false=0, true=1) 
      newSF: integer/boolean (false=0, true=1) 
      newOF: integer/boolean (false=0, true=1)
      newRAX: integer
      newRBX: integer
      newRCX: integer 
      newRDX: integer
      newRSI: integer 
      newRDI: integer
      newRBP: integer 
      newRSP: integer
      newRIP: integer
      newR8:  integer
      newR9:  integer
      newR10: integer
      newR11: integer
      newR12: integer
      newR13: integer
      newR14: integer
      newR15: integer

dbvm_removechangeregonbp(physicaladdress) : Disables the changeregonbp breakpoint

dbvm_log_cr3_start() : Tells DBVM to record (up to 512) unique CR3 values it encounters
dbvm_log_cr3_stop() : Stops the logging and returns the results as a table

dbvm_speedhack_setSpeed(speed): Changes the speed the timestamp counter goes up (similar to speedhack in a process but affects the whole system including the clock)
dbvm_setTSCAdjust(enabled, timeout): If enabled (default true with timeout 2000) will return a small(20-30) timestamp between multiple rdtsc/rdtscp instructions.  The timeout is the number of actual TSC to watch else the actual time is given. A high timeout can make your system unstable

dbk_getCR0(): Returns Control Register 0
dbk_getCR3(): Returns Control Register 3 of the currently opened process
dbk_getCR4(): Returns Control Register 4
dbk_getPhysicalAddress(address): Returns the physical address of the given address
dbk_writesIgnoreWriteProtection(state): Set to true if you do not wish to initiate copy-on-write behaviour


getPhysicalAddressCR3(CR3, address): Looks up the physical address for the given virtual address in the given pagetable base. Returns nil if not paged
readProcessMemoryCR3(CR3, address, size): Reads the virtual memory of the given process's CR3 value. Returns a bytetable on success, nil if fail to read (paged out)
writeProcessMemoryCR3(CR3, address, bytetable): Reads the virtual memory of the given process's CR3 value
 


allocateKernelMemory(size) : Allocates a block of nonpaged memory and returns the address
freeKernelMemory(address) : Frees the given memory region

mapMemory(address, size,  frompid OPTIONAL, topid OPTIONAL): maps a specific address to the usermode context from the given PID to the given PID. If the PID is 0 or not specified, the cheat engine process is selected. This functions returns 2 results. Address and MDL. The MDL you will need for unmapMemory()
unmapMemory(address, mdl)                                                         





onAPIPointerChange(function): Registers a callback when an api pointer is changed (can happen when the user clicks ok in settings, or when dbk_use*** is used. Does NOT happen when setAPIPointer is called)


setAPIPointer(functionid, address): Sets the pointer of the given api to the given address. The address can be a predefined address set at initialization by Cheat Engine, or an address you got from an autoassembler script or injected dll (When Cheat Engine itself was targeted)

functionid:
  0: OpenProcess
    Known compatible address defines:
      windows_OpenProcess
      dbk_OpenProcess

  1: ReadProcessMemory
    Known compatible address defines:
      windows_ReadProcessMemory
      dbk_ReadProcessMemory
      dbk_ReadPhysicalMemory
      dbvm_ReadPhysicalMemory

  2: WriteProcessMemory
    Known compatible address defines:
      windows_WriteProcessMemory
      dbk_WriteProcessMemory
      dbk_WritePhysicalMemory
      dbvm_WritePhysicalMemory


  3: VirtualQueryEx
    Known compatible address defines:
      windows_VirtualQueryEx
      dbk_VirtualQueryEx
      VirtualQueryExPhysical

Extra variables defined:
dbk_NtOpenProcess : Address of the NtOpenProcess implementation in DBK32


The dbvm_ addresses should only be used with auto assembler scripts injected into Cheat Engine
dbvm_block_interrupts  : Address of function dbvm_block_interrupts : DWORD; stdcall;
dbvm_raise_privilege   : Address of function dbvm_raise_privilege : DWORD; stdcall;
dbvm_restore_interrupts: Address of function dbvm_restore_interrupts : DWORD; stdcall;
dbvm_changeselectors   : Address of function dbvm_changeselectors(cs,ss,ds,es,fs,gs: dword): DWORD; stdcall;


D3DHOOK class:
The d3dhook functions provide a method to render graphics and text inside the game, as long as it is running in directx9, 10 or 11

createD3DHook(textureandcommandlistsize OPTIONAL, hookmessages OPTIONAL)
  Hooks direct3d and allocates a buffer with given size for storage of for the rendercommand list

  hookmessages defines if you want to hook the windows message handler for the direct3d window. The d3dhook_onClick function makes use of that


  If no size is provided 16MB is used and hookmessages is true

  Note: You can call this only once for a process

  It returns a d3dhook object

properties
  Width: Integer : The width of the screen (readonly)
  Height: integer: The height of the screen (readonly)
  DisabledZBuffer: boolean : Set this to true if you don't want previously rendered walls to overlap a newly rendered object (e.g map is rendered first, then the players are rendered)
  WireframeMode: boolean : Set this to true if you don't want the faces of 3d objects to be filled
  MouseClip: boolean : Set this if to true if you have one of those games where your mouse can go outside of the gamewindow and you don't want that.
  OnClick: function(d3dhook_sprite, x, y)
    A function to be called when clicked on an sprite (excluding the mouse)
    x and y are coordinates in the sprite object. If sprites overlap the highest zorder sprite will be given. It does NOT care if a transparent part is clicked or not

    Note: If you set this it can cause a slowdown in the game if there are a lot of sprites and you press the left button a lot

  OnKeyDown: function(virtualkey, char)
    function(vkey, char) : boolean
      A function to be called when a key is pressed in the game window (Not compatible with DirectInput8)
      Return false if you do not wish this key event to pass down to the game


methods
  beginUpdate() : Use this function when you intent to update multiple sprites,textcontainers or textures. Otherwise artifacts may occur (sprite 1 might be drawn at the new location while sprite 2 might still be at the old location when a frame is rendered)
  endUpdate() : When done updating, call this function to apply the changes
  enableConsole(virtualkey): Adds a (lua)console to the specific game. The given key will bring it up (0xc0=tilde(`~))
  createTexture(filename) : Returns a d3dhook_texture object
  createTexture(picture, transparentColor OPTIONAL): Returns a d3dhook_texture object
    if the picture is not a transparent image the transparentcolor parameter can be used to make one of it's colors transparent

  createFontmap(font) : Returns a d3dhook_fontmap object created from the given font
  createSprite(d3dhook_texture): returns a d3dhook_sprite object that uses the given texture for rendering
  createTextContainer(d3dhook_fontmap, x, y, text): Returns a d3dhook_textContainer object


D3DHook_Texture Class (Inheritance: Object)
This class controls the texture in memory. Without a sprite to use it, it won't show

properties
  Height: integer (ReadOnly)
  Width: integer (ReadOnly)
methods
  loadTextureByPicture(picture)



D3DHook_FontMap Class (Inheritance: D3DHook_Texture->Object)
A fontmap is a texture that contains extra data regarding the characters. This class is used by the textcontainer
Current implementation only supports 96 characters (character 32 to 127)

properties
  -
methods
  changeFont(font): Changes the fontmap to the selected font
  getTextWidth(string): Returns the width of the given string in pixels


D3DHook_RenderObject Class (Inheritance: Object)
The renderobject is the abstract class used to control in what manner objects are rendered.
The sprite and TextContainer classed inherit from this

properties
  X: Float - The x-coordinate of the object on the screen
  Y: Float - The y-coordinate of the object on the screen
  CenterX: Float - X coordinate inside the object. It defines the rotation spot and affects the X position
  CenterY: Float - Y " "
  Rotation: Float - Rotation value in degrees (0 and 360 are the same)
  Alphablend: Float - Alphablend value. 1.0 is fully visible, 0.0=invisible
  Visible: boolean - Set to false to hide the object
  ZOrder: integer - Determines if the object will be shown in front or behind another object
methods
  -



D3DHook_Sprite Class (Inheritance: D3DHook_RenderObject->Object)
A d3dhook_sprite class is a visible texture on the screen.


properties
  Width: Integer - The width of the sprite in pixels. Default is the initial texture width
  Height: Integer - The height of the sprite in pixels. Default is the initial texture height
  Texture: d3dhook_texture - The texture to show on the screen

methods
  -


D3Dhook_TextContainer Class (Inheritance: D3DHook_RenderObject->Object)
A d3dhook_sprite class draws a piece of text on the screen based on the used fontmap.
While you could use a texture with the text, updating a texture in memory is slow. So if you wish to do a lot of text updates, use a textcontainer

properties
  FontMap : The D3DHook_FontMap object to use for rendering text
  Text : The text to render
methods
  -




Disassembler Class (Inheritance: Object)



createDisassembler() - Creates a disassembler object that can be used to disassemble an instruction and at the same time get more data
getDefaultDisassembler() - Returns the default disassembler object used by a lot of ce's disassembler routines
getVisibleDisassembler() - Returns the disassembler used by the disassemblerview. Special codes are: {H}=Hex value {R}=Register {S}=Symbol {N}=Nothing special {C######}=RGB color , {B######}=Background RGB color were ###### is 0xBBGGRR 

registerGlobalDisassembleOverride(function(sender: Disassembler, address: integer, LastDisassembleData: Table): opcode, description): Same as Disassembler.OnDisassembleOverride, but does it for all disassemblers, including newly created ones.  Tip: Check the sender to see if you should use syntax highlighting codes or not
  This function returns an ID you can pass on to unregisterGlobalDisassembleOverride()  6.4+

unregisterGlobalDisassembleOverride(id)

properties
  LastDisassembleData : Table
  OnDisassembleOverride: function(sender: Disassembler, address: integer, LastDisassembleData: Table): opcode, description
  OnPostDisassemble: function(sender: Disassembler, address: integer, LastDisassembleData: Table, result: string, description: string): result, description
  syntaxhighlighting: boolean : This property is set if the syntax highlighting codes are accepted or not

Methods
  disassemble(address): Disassembles the given instruction and returns the opcode. It also fills in a LastDisassembleData record
  decodeLastParametersToString() : Returns the unedited "Comments" information. Does not display userdefined comments
  getLastDisassembleData() : Returns the LastDisassembleData table.
    The table is build-up as follow:
      address: integer - The address that was disassembled
      opcode: string - The opcode without parameters
      parameters: string - The parameters
      description: string - The description of this opcode
      commentsoverride: string - If set, this will be the comments/LastParamatersToString result
      bytes: table - A table containing the bytes this instruction consists of (1.. )

      modrmValueType: DisAssemblerValueType  - Defines the type of the modrmValue field (dvtNone=0, dvtAddress=1, dvtValue=2)
      modrmValue: Integer - The value that the modrm specified. modrmValueType defines what kind of value

      parameterValueType: DisAssemblerValueType
      parameterValue: Integer - The value that the parameter part specified

      isJump: boolean - Set to true if the disassembled instruction can change the EIP/RIP (not ret)
      isCall: boolean - Set to true if it's a Call
      isRet: boolean - Set to true if it's a Ret
      isConditionalJump: boolean - Set to true if it's a conditional jump



DissectCode class: (Inheritance: Object)
getDissectCode() : Creates or returns the current code DissectCode object

properties:
methods:
  clear() : Clears all data
  dissect(modulename) : Dissects the memory of a module
  dissect(base,size) : Dissect the specified memory region

  addReference(fromAddress, ToAddress, type, OPTIONAL isstring):
    Adds a reference. Type can be jtCall, jtUnconditional, jtConditional, jtMemory
    In case of jtMemory setting isstring to true will add it to the referenced strings list

  deleteReference(fromAddress, ToAddress)


  getReferences(address) : Returns a table containing the addresses that reference this address and the type
  getReferencedStrings(): Returns a table of addresses and their strings that have been referenced. Use getReferences to find out which addresses that are
  getReferencedFunctions(): Returns a table of functions that have been referenced. Use getReferences to find out which callers that are

  saveToFile(filename)
  loadFromFile(filename)

RIPRelativeScanner class: (Inheritance: Object)
createRipRelativeScanner(startaddress, stopaddress, includejumpsandcalls OPTIONAL):
createRipRelativeScanner(modulename, includejumpsandcalls OPTIONAL): Creates a RIP relative scanner. This will scan the provided module for RIP relative instructions which you can use for whatever you like
properties:
  Count: integer - The number of instructions found that have a RIP relative address
  Address[]: integer - An array to access the results. The address is the address of the RIP relative offset in the instruction

methods:
-
 



LuaPipe class: (Inheritance: Object)
  Abstract class that LuaPipeServer and LuaPipeclient inherit from. It implements the data transmission methods

properties
  Connected: boolean: True if the pipe is connected

methods
  lock() : Acquire a lick on this pipe till unlock is called. If lock can not be acquired, wait. Recursive calls are allowed
  unlock()
  writeBytes(ByteTable, size OPTIONAL): Writes the provided byte table to the pipe. if size is not provided, the whole table is sent. Returns the number of bytes sent, or nil on failure
  readBytes(size: integer): returns a byte table from the pipe, or nil on failure

  readDouble(): Read a double from the pipe, nil on failure
  readFloat(): Read a float from the pipe, nil on failure
  readQword(): Read an 8 byte value from the pipe, nil on failure
  readDword(): Read a 4 byte value from the pipe, nil on failure
  readWord(): Read a 2 byte value from the pipe, nil on failure
  readByte(): Read a byte from the pipe, nil on failure

  readString(size: integer): Reads a string from the pipe, nil on failure.  (Can support 0-byte chars)
  readWideString(size: integer): Reads a widestring from the pipe, nil on failure

  writeDouble(v: double): Writes a double to the pipe. Returns the number of bytes sent, nil on failure
  writeFloat(v: single): writes a float to the pipe. Returns the number of bytes sent, nil on failure
  writeQword(v: qword): writes an 8 byte value to the pipe. Returns the number of bytes sent, nil on failure
  writeDword(v: dword): writes a 4 byte value to the pipe. Returns the number of bytes sent, nil on failure
  writeWord(v: word): writes a word to the pipe. Returns the number of bytes sent, nil on failure
  writeByte(v: byte): writes a byte to the pipe. Returns the number of bytes sent, nil on failure

  writeString(str: string; include0terminator: boolean OPTIONAL); Writes a string to the pipe. If include0terminator is false or not provided it will not write the 0 terminator byte.  Returns the number of bytes written, or nil on failure
  writeWideString(str: widestring; include0terminator: boolean OPTIONAL); Writes a widestring to the pipe. If include0terminator is false or not provided it will not write the 0 terminator bytes. Returns the number of bytes written, or nil on failure

LuaPipeClient class: (Inheritance: LuaPipe>Object)
Class implementing a client that connects to a pipe

connectToPipe(pipename,timeout OPTIONAL): Returns a LuaPipeClient connected to the given pipename. Nil if the connection fails. Timeout is number of milliseconds before it disconnects on read/write operations. 0 or nil means never

properties:
methods:
-

LuaPipeServer Class: (Inheritance: LuaPipe>Object)
  Class launching the server side of a pipe

createPipe(pipename, inputsize OPTIONAL, outputsize OPTIONAL) : Creates a LuaPipeServer which can be connected to by a pipe client. InputSize and Outputsize define buffers how much data can be in the specific buffer before the writer halts.  Default input and output size is 4096 for both

properties
  valid: boolean - Returns true if the pipe has been created properly. False on failure (e.g wrong pipename)
  handle: integer - The handle of the pipe serverside (this can be used with duplicateHandle to get a handle into the target process)


methods
  acceptConnection() - Waits for a client to connect to this pipe (Warning: Freezes the thread this is executed in)



openLuaServer(Name):
  Opens a pipe with the given name. The LuaClient dll needs this name to connect to ce


  LuaClient.dll functions:  (STDCALL calling machanic)
    BOOL CELUA_Initialize(char *name) : Initializes
    UINT_PTR CELUA_ExecuteFunction(char *luacode, UINT_PTR parameter)
      This function executes a lua function with parameters (parameter) and with the luacode as body Parameter will be treated as an integer
      In short:
        function(parameter)
          <luacode>
        end


    the return value of this function is the return value of the lua function (integer)

    UINT_PTR CELUA_ExecuteFunctionAsync(char *luacode, UINT_PTR parameter)
      See CELUA_ExecuteFunction but runs in the server thread instead of passing it to the main GUI and then wait for it's return

    integer CELUA_GetFunctionReferenceFromName(char *functionname): Returns a reference ID you can pass on to CELUA_ExecuteFunctionByReference
    UINT_PTR CELUA_ExecuteFunctionByReference(int refid, int paramcount, PVOID *parameters, BOOL async):
      This functions executes the function specified by reference id. If async is true, the code will run in a seperate thread instead of the main thread
      paramcount is the number of parameters to pass on to the function
      parameters is a pointer to a list of integers.  32-bit in 32-bit targets, 64-bit in 64-bit targets



Settings class
  This class can be used to read out and set settings of cheat engine and of plugins, and store your own data

global functions
  reloadSettingsFromRegistry(): This will cause cheat engine to reload the settings from the registry and apply them

  getSettings(path Optional): Settings - Returns a settings object. If path is nil it will point to the Cheat Engine main settings (Registry) . If name is provided the settings currently accessed will be the one at the subkey provided
  Note: Keep in mind that it returns a new object each call, even if he same name is used multiple times


properties
  Path: string - Gets/Sets the current subkey (nil if main)
  Value[]: A table access into the settings. e.g: Value["Count"]=12  .Setting vcalue to nil will delete it
  [] : Same as Value[]

methods
  getBinaryValue(name, stream) : Gets binary data from the registry value. Adds it after the current 'position'
  setBinaryValue(name, stream, size OPTIONAL) : Sets binary data in the registry value. If size is given, write from the current position. If not, or size=0, writes from position 0 to the end
  getBinaryValue(name): bytetable
  setBinaryValue(name, bytetable)




SymbolList class
  This class can be used to look up an address to a symbolname, and a symbolname to an address
  It can also be registered with the internal symbol handler of cheat engine

  This class makes use of a special "Symbol" table construction that contains size and optionally other data
    Symbol Table:
      modulename: string
      searchkey: string
      address: integer
      symbolsize: integer

Global functions
  createSymbolList() : Creates an empty symbollist




Properties
Methods
  clear()
  getSymbolFromAddress(address) : Searches the list for the given address. The address does not have to match the exact address. As long as it falls withing the range
  getSymbolFromString(searchkey)
  addModule(modulename, modulepath, address, size, is64bit)
  deleteModule(modulename)
  deleteModule(address)  
  addSymbol(modulename, searchkey, address, symbolsize, skipAddressToSymbolLookup OPTIONAL, extradata OPTIONAL)
    Adds a symbol to the symbollist
    extradata is a table which can be used to fill in a return type and parameters for function calls. It has the following fields:
      returntype: string
      parameters: string

  deleteSymbol(searchkey)
  deleteSymbol(address)
  register() : Registers the current symbol list with the symbol handler
  unregister(): Unregisters the current symbol list from the symbol handler


Pagecontrol Class (WinControl->Control->Component->Object)
  This is an object that can hold multiple pages

global functions
  createPageControl(owner)
properties
  ShowTabs: boolean - Shows the tabs
  TabIndex: integer - Gets and sets the current tab
  ActivePage: TabSheet - Returns the current tabsheet.
  PageCount: integer - Gets the number of pages
  Page[]: TabSheet - Get a specific page (TabSheet)
methods
  addTab() : TabSheet - Creates a new TabSheet
  tabRect(index): Rect - returns a rect table describing the position of the specific tab

TabSheet class (WinControl->Control->Component->Object)
  Part of a page control. This object can contain other objects
properties
  TabIndex: integer - the current index in the pagelist of the owning pagecontrol
methods

Internet class (Object)
global functions
  getInternet(string) - Returns an internet class object.  The string provided will be the name of the client provided

properties
  Header : string - the additional header to be sent with the next getURL request
methods
  getURL(path) - returns a string containing the contents of the url. nil on failure
  postURL(path, urlencodeddata) - posts the given data to the path and returns the results


CustomType class (Object)
The custom type is an convertor of raw data, to a human readable interpretation.

global functions
  registerCustomTypeLua(typename, bytecount, bytestovaluefunction, valuetobytesfunction, isFloat)
    Registers a Custom type based on lua functions
    The bytes to value function should be defined as "function bytestovalue (b1,b2,b3,b4)" and return an integer as result
    The value to bytes function should be defined as "function valuetobytes (integer)" and return the bytes it should write

    returns the Custom Type object


  registerCustomTypeAutoAssembler(script)
    Registers a custom type based on an auto assembler script. The script must allocate an "ConvertRoutine" and "ConvertBackRoutine"

    returns the Custom Type object

  getCustomType(typename) : Returns the custom type object, or nil if not found

properties
  name: string
  functiontypename: string
  CustomTypeType: TCustomTypeType - The type of the script
  script: string - The custom type script
  scriptUsesFloat: boolean - True if this script interprets it's user side values as float

methods
  byteTableToValue({bytetable},Address Optional)
  valueToByteTable(value, Address Optional)

TFrmTracer class (Inheritance: Form->ScrollingWinControl->CustomControl->WinControl->Control->Component->Object)

properties
  Count: integer - number of entries in the list
  SelectionCount: integer - The number of selected entries

  Entry[index]: table - Information about each entry. Read only. (Index starts at 0)
    table is formatted as:
    {
      address: integer - address of the instruction
      instruction: string - disassembled instruction
      instructionSize: integer - bytesize of the instruction
      referencedAddress: integer - address the code references
      referencedData: bytearray - The bytes of the referenced data at the time of tracing
      context: contexttable - the state of the cpu when this instruction got executed (contains registers(EAX/RAX, ...), floating points(FP) and XMM values
      hasStackSnapshot: boolean - set to true if there is a stack entry      
      selected: boolean - Set to true if the entry is selected

    }


  StackEntry[index]: bytearray - The stacksnapshot of that entry. Nil if not available

methods



TfrmUltimap2 class(Inheritance: Form->ScrollingWinControl->CustomControl->WinControl->Control->Component->Object) 
getUltimap2(): TfrmUltimap2 - Returns the ultimap2 form, nil if not open

properties
  Count: integer - The number of entries in the list (READONLY)
methods
  isInList(address): boolean,count - returns true if the current address is in the list of addresses. In case of true, it also returns the count value (up to 255)

TfrmCodeFilter class(Inheritance: Form->ScrollingWinControl->CustomControl->WinControl->Control->Component->Object) 
getCodeFilter(): TfrmCodeFilter - Returns the codefilter form

properties
methods
  isInList(address): boolean - Returns true if this address is in the list


----SQL Classes----
CustomConnection class (Inheritance: Component->Object)
properties
  Connected: Boolean - Gets the current connection state, and lets you connect as well
  LoginPrompt: Boolean
  AfterConnect: function(sender)
  AfterDisconnect: function(sender)
  BeforeConnect: function(sender)
  BeforeDisconnect: function(sender)
  
methods
  close(forceClose:Boolean Optional)
  open()


Database Class (Inheritance: CustomConnection->Component->Object)
properties
  Connected: Boolean
  DatabaseName: string
  KeepConnection: Boolean
  Params: Strings 
  TransactionCount: integer readonly

methods

SQLConnection Class (Inheritance: Database->CustomConnection->Component->Object)
properties
  Password: String
  UserName: string
  Transaction: SQLTransaction - SQLTransaction object. Needs to be set
  CharSet: string
  HostName: string
  Options: string set - [scoExplicitConnect, scoApplyUpdatesChecksRowsAffected]

methods
  startTransaction()
  endTransaction()
  executeDirect(sql)
  getTableNames() : Returns a counted table with all tablenames


SQLite3Connection class(Inheritance: SQLConnection->Database->CustomConnection->Component->Object) 
createSQLite3Connection(owner) - creates an SQLite3Connection object
setSQLiteLibraryName(pathwithdllname)- Lets you set the path to the sqlite3.dll in case it's not .\win*\sqlite3.dll

properties
methods
  createDB()
  dropDB()
  getInsertID(): integer

ODBCConnection class(Inheritance: SQLConnection->Database->CustomConnection->Component->Object) 
createODBCConnection(owner) - creates an ODBCConnection object
properties
  Driver: string
  FileDSN: string

methods



DBTransaction class (Inheritance: Component->Object)
properties
  Active: boolean
  DataBase: Database
methods
  closeDataSets()

SQLTransaction class (Inheritence: DBTransaction->Component->Object)
createSQLTransaction(owner): Creates an SQLTransaction object
properties
  SQLConnection: SQLConnection
  Params: StringList
  Options: string - set of [stoUseImplicit, stoExplicitStart]
  Action: string - options between caNone, caCommit, caCommitRetaining, caRollback,
    caRollbackRetaining

methods
  commit()  
  commitRetaining()
  rollback()
  rollbackRetaining()
  startTransaction()
  endTransaction()


Param class (Inheritence: CollectionItem->Object))
properties
  Name: string
  Value: something
  DataType: string
  AsBoolean
  AsByteTable
  AsInteger
  AsNumber
  AsString
  Text  
  Size
  Precision
  IsNull: boolean

   
methods



Params class (Inheritence: Collection->Object)
properties
  Items[index]: Param

methods
  AddParam(Param)


Field class (Inheritance: Component->Object)
properties
  FieldName: string
  Index: integer
  Value: something
  DataType: string
  AsBoolean
  AsByteTable
  AsInteger
  AsNumber
  AsString
  Text  
  Size
  IsNull: boolean
  
methods


Fields class (Inheritence: Object)
properties
  Count: integer
  Fields[index]: Field
methods
  add(Field)
  clear()
  fieldByName(name): Field
  fieldByNumber(integer): Field
  indexOf(field): integer



Dataset class (Inheritance: Component->Object)
properties
  BlockReadSize: integer
  BOF: boolean; READONLY
  CanModify: boolean READONLY
  DefaultFields: boolean READONLY
  EOF: boolean; READONLY
  FieldCount: integer; READONLY
  Fields: Fields READONLY
  Found: boolean READONLY
  Modified: boolean READONLY
  IsUniDirectional: boolean READONLY
  RecordCount: integer READONLY
  RecNo: integer
  
  FieldValues[fieldname]: something
  Filter: string
  Filtered: boolean
  FilterOptions: set of [foCaseInsensitive, foNoPartialCompare]
  Active: boolean
  AutoCalcFields: boolean


methods
  append()
  appendRecord({values})
  cancel()
  checkBrowseMode()
  clearFields()
  close();
  controlsDisabled(): boolean
  cursorPosChanged;
  delete;
  disableControls;
  edit;
  enableControls;
  fieldByName(fieldname): Field
  findField(fieldname): Field
  findFirst() boolean
  findLast()
  findNext()
  findPrior()
  first()
  insert()
  isEmpty()
  last()
  locate(KeyFields, KeyValues, options:"[loCaseInsensitive, loPartialKey]"): boolean
  lookup(keyfields, KeyValues, ResultFields): something
  moveBy(distance)
  next()
  open()
  post()
  prior()
  refresh()
  updateCursorPos()
  updateRecord() 



DBDataset class (Inheritance: Dataset->Component->Object)
properties
  DataBase: Database
  Transaction: DBTransaction

methods
-


CustomBufDataset class (Inheritance: DBDataset->Dataset->Component->Object)
properties
  FileName: string
  PacketRecords: integer
  UniDirectional: boolean
  IndexName: string
  MaxIndexesCount: integer
  ChangeCount: integer
  ReadOnly: boolean

methods
  applyUpdates(MaxErrors Optional)
  cancelUpdates()  
  loadFromStream(stream)
  saveToStream(stream)
  loadFromFile(filename)
  saveToFile(filename)
  createDataset()


CustomSQLQuery class (Inheritance: CustomBufDataset->DBDataset->Dataset->Component->Object) 
properties
  prepared: boolean READONLY
  SQLConnection: SQLConnection
  SQLTransaction: SQLTransaction


      
methods
  prepare()
  unprepare()
  execSQL()
  rowsAffected()
  paramByName(paramname): Param




SQLQuery class (Inheritance: CustomSQLQuery->CustomBufDataset->DBDataset->Dataset->Component->Object) 
createSQLQuery(owner)
properties
  Database: Database

  SchemaType: string READFONLY - can be: stNoSchema, stTables, stSysTables, stProcedures, stColumns, stProcedureParams, stIndexes, stPackages, stSchemata, stSequences
  StatementType: string READONLY - can be :stUnknown, stSelect, stInsert, stUpdate, stDelete,
      stDDL, stGetSegment, stPutSegment, stExecProcedure,
      stStartTrans, stCommit, stRollback, stSelectForUpd

  Params: Params object
  ParamCheck: Boolean
  ParseSQL: Boolean
  UpdateMode: string - can be :upWhereAll, upWhereChanged, upWhereKeyOnly
  UsePrimaryKeyAsKey: boolean
  ReadOnly: boolean


  SQL: string
  InsertSQL: stringlist
  UpdateSQL: stringlist
  DeleteSQL: stringlist
  RefreshSQL: stringlist
  Options: string - set of [sqoKeepOpenOnCommit, sqoAutoApplyUpdates, sqoAutoCommit, 
      sqoCancelUpdatesOnRefresh, sqoRefreshUsingSelect]


methods
  -

HotkeyHandlerThread(Inheritence: Thread)
getHotkeyHandlerThread() : Returns the hotkey handler thread used internally by CE

properties
  state: 0 ('htsActive')=Active , 1('htsMemrecOnly')=Memory records only, 2('htsNoMemrec')=Everything except memoryrecords, 3('htsDisabled')=disabled

methods
  -

RemoteThread class(Inheritance: -)
createRemoteThread(address, parameter)

properties
  Result : The 32-bit value returned by the thread 

methods
  waitForThread(timeout OPTIONAL) : Waits for the thread to finish. Timeout is time in milliseconds. If nil, the timeout it infinite. If 0, it returns without wait

ModuleLoader(Inheritance: -)
loadModule(pathtodll, executeEntryPoint OPTIONAL default=true, timeout OPTIONAL default=nil=infinite)

properties:
  loaded: boolean - true if successfuly mapped
  exports: Table containing all exports
  entryPoint: integer - address of the entrypoint
  

WriteLog class(Inheritence: -)
The writelog is the log that keeps all writes (when enabled)

properties
  status: boolean
  logsize: integer 

methods
  getLog(): table - Returns an indexed table with the write logs. each entry has a table with the fields: address, original and new


DotNetDataCollector class
getDotNetDataCollector() - Returns the current dotnetdatacollector object

properties
Attached: boolean - Returns true if attached to a process


methods
enumDomains(): table - Returns an index table containing all domains. Each entry is build up as {DomainHandle, Name}
enumModuleList(DomainHandle) : table - Returns an indexed table containing information about all modules. Each module entry is build up as {ModuleHandle, BaseAddress, Name}
enumTypeDefs(ModuleHandle) : table - Returns an indexed table containing information about all TypeDefs (classes) . Each entry is build up as {TypeDefToken, Name, Flags, Extends}
getTypeDefMethods(ModuleHandle, TypedefToken) : table - Returns a table containing all the methods in the specified typedef. Each entry is build up as {MethodToken, Name, Attributes, ImplementationFlags, ILCode, NativeCode, SecondaryNativeCode[]: Integer)
getTypeDefParent(ModuleHandle, TypedefToken): {ModuleHandle, TypedefToken}
getTypeDefData(ModuleHandle, TypedefToken) : table - Returns a table containing all the fields in the specified typedef.  {ObjectType, ElementType, CountOffset, ElementSize, FirstElementOffset, ClassName, Fields[]{Offset, FieldType, Name} }
getMethodParameters(ModuleHandle, MethodDefToken): table - Returns a table containing all the parameters of the method. {Name, CType}
getAddressData(address): table - Queries a specific address and returns information about it, assuming it is a valid object. It contains the following data: {StartAddress, ObjectType, ElementType, CountOffset, ElementSize, FirstElementOffset, ClassName, Fields[]{Offset, FieldType, Name} }

enumAllObjects(): table - Queries ALL defined objects. {StartAddress, Size, TypeID{token1,token2}, ClassName}   WARNING: This will take a LOOOOOONG time and if done from the main thread will make it look like CE is frozen
enumAllObjectsOfType(ModuleHandle, TypedefToken): {} - Returns a list of addresses that have this type




Diagram class(Inheritance: CustomControl->WinControl->Control->LclComponent->Component->Object):
The diagram class lets you represent data using blocks and lines.

createDiagram(owner)

properties
  LineThickness: integer - Default thickness of lines in pixels
  LineColor: integer - Sets the default color of lines
  PlotPointColor: integer - Sets the default color for points
  BlockBackground: integer - Color of the diagramBlocks
  BackgroundColor: integer - Color of the diagram background
  ArrowStyles: string - can be one or more of the following between [ and ] : 
                          asOrigin : There will be an arrow at the point of origin
                          asDestination : There will be an arrow at the destination
                          asPoints: There will be an arrow at plot point locations
                          asCenterBetweenPoints: There will be an arrow between two points
                          asCenter: There will be an arrow in the center of the line

  BlockCount: integer - Returns the number of blocks in the diagram (readonly)
  Block[index]: DiagramBlock - Returns the block at the specific index
  LinkCount: integer - Returns the number of linkes in the diagram (readonly)
  Link[index]: DiagramLink - Returns the link at the specific index
  DrawPlotPoints: boolean - If set to true linkpoints will be shown
  AllowUserToCreatePlotPoints: boolean - If true(default) will allow the user to create plotpoints by clicking on lines
  AllowUserToMovePlotPoints: boolean - If true(default) will allow the user to move plotpoints by dragging them
  AllowUserToResizeBlocks: boolean - If true(default) will allow the user to resize blocks
  AllowUserToMoveBlocks: boolean - If true(default) will allow the user to move blocks around by draging the caption
  AllowUserToChangeAttachPoints: boolean - If true(default) will allow the user to move move the point where a line connects to the block by dragging it
  ScrollX: integer - The horizontal scroll
  ScrollY: integer - The vertical scroll
  Zoom: float - The zoom level to use 




methods
  createBlock(): DiagramBlock - Creates a new uninitialized block
  addConnection(Source: DiagramBlock, Destination: DiagramBlock): DiagramLink - Creates a link between the two blocks
  addConnection(Source: BlockSideDescriptorTable, Destination: BlockSideDescriptorTable) - Creates a link using the BlockSideDescritorTable table definition
      BlockSideDescriptorTable=
      {
         Block: DiagramBlock - The block to attach to
         Side: integer - One of the blockside typedefs: dbsTop=0, dbsLeft=1, dbsRight=2, dbsBottom=3, dbsTopLeft=4, dbsTopRight=5, dbsBottomLeft=6, dbsBottomRight=7
         Position: integer - Position on the provided side based on the center. Only for Sides 0 to 3
      } 

  saveAsImage(filenamepng): saves the current display as an PNG image
  saveToFile(filename): Saves the state of the diagram to a file
  loadFromFile(filename): loads the state of the diagram from a file
  saveToStream(stream): Saves the state of the diagram to a stream
  loadFromStream(stream): loads the state of the diagram from a stream
  getObjectAt({x,y}): Returns the object at this position. nil if nothing
  


DiagramBlock class:
The diagramBlock is a block with a header and body which can contain text (ansi escape codes supported) 

properties
  Owner: Diagram - The diagram that this block is in
  X: integer - x-position of the block
  Y: integer - y-position of the block
  Width: integer - Width of the block
  Height: integer - Height of the block
  Caption: string - Header of the block (ansi escape codes supported)
  Strings: Strings - Strings object containing the lines of the block (ansi escape codes supported)
  BackgroundColor: integer - When set overrides the default color for the block to the given one
  TextColor: Integer - The starting/default textcolor
  Name: string - The name of the block
  AutoSize: boolean - If true the width and height of the box will adjust to the given Caption and Strings
  AutoSide: boolean - If true the connection side of a link will be picked for you instead of providing the side yourself
  AutoSideDistance: integer - If autoside is true and there are multiple lines on the same side, this determines the distance between
  ShowHeader: boolean - If true show ther header. (default true)
  DragBody: boolean - If true allows dragging of the body. Useful when there is no header (default false)
  Tag: integer - Use for whatever you like
  OnDoubleClickHeader: function(DiagramBlock) - Function to call when the block's header is doubleclicked
  OnDoubleClickBody: function(DiagramBlock) - Function to call when the block's body is doubleclick
  OnRenderHeader: function(sender,rect,beforeownerdraw): boolean - Function to call when the header is being rendered. This is called twice, before and after the normal painting code. In case of before and the function returns nil or false, the original text will not be drawn
  OnRenderBody: function(sender,rect,beforeownerdraw): boolean - ^ but then for body
  OnDragStart: funtion(DiagramBlock) - Called when a block starts getting dragged
  OnDrag: function(DiagramBlock) - Called when a block is dragged around
  OnDragEnd: function(DiagramBlock) - Called when a dragged block is released

methods
  getLinks(): table - Returns a table two elements: 'asSource' and 'asDestination'. each of those will have a table with DiagramLinks linking with the box
  overlapsWith(block): boolean - Returns true if the two blocks overlap
  intersectsWithLine({x,y},{x,y}): boolean,intersectpoint - Returns true and the point of intersection or false if no itersection


DiagramLink class:
Links between blocks

properties
  OriginBlock: DialogBlock - The source of the link 
  DestinationBlock: DialogBlock - The destination of the link
  OriginDescriptor: BlockSideDescriptorTable
  DestinationDescriptor: BlockSideDescriptorTable   
  PointCount: integer - The number of points in the table
  Points[index]: table{x,y} - Return a table with x,y coordinates for the point at the given index (index starts at 0)
  LineColor: integer - Color of the line , when set overrides the default
  Linethickness: integer - thickness of the line, when set overrides the default
  ArrowStyles: string - See diagram ArrowStyles
  Name: string - Name of the link
  Tag: integer - Use for whatever youy like
  OnDblClick: function(sender) - Function to call when the link is doubleclicked

methods
  hasLinkToBlock(DiagramBlock): boolean - Returns true/false depending on if this link has a connection to the provided block
  reset() - Sets all custom colors sizes back to default
  updateSide(BlockSideDescriptorTable): Updates the side of the block described by the BlockSideDescriptorTable   
  getPointIndexAt(x,y): integer - Returns the pointindex at the given x, y coordinate
  addPoint(x,y,index OPTIONAL): creates a point. If no index is given if inside the line at that line index, else at the end of the list.  If a index is given at that specific index. 
  removeAllPoints(): Removes all points


RemoteExecutor class
The remoteExecute class creates an executor thread inside the target process waiting for commands to execute specific functions
An executor can only run one piece of code at a time, but you can have more than one executor

createExecuteMethodStub(callmethod, address, classregisternr, {type=typenr},typenr,{type=5, size=y, isOutputOnly=true/false, isInputOnly=true/false }, ....) - Creates an ExecuteCodeExStub object which the executor can execute
createExecuteCodeExStub(callmethod, address, {type=typenr},typenr,{type=5, size=y, isOutputOnly=true/false, isInputOnly=true/false }, ....) - Creates an ExecuteCodeExStub object which the executor can execute
createRemoteExecutor() - creates a new remote executor

properties

methods
  executeStub(ExecuteCodeExStub,{parameters},timeout,waittilldone) 

