
                      TF-5129 10/100 PC Card
                 NOVELL DOSODI DRIVER INSTALLATION

==========================================================================
NOTE: You must run card enable progrm (ECARD.EXE) before
      loading Netware Server.
==========================================================================

1. NOVELL DOS ODI Workstation Driver Installation

Installation Procedure:
-----------------------
Before you start with the installation process, make sure that
the adapter is properly installed and configured. Make sure
that your NWCLIENT operating system is properly installed.

a. Edit the NET.CFG if you want to change some parameters.

   Sample for NET.CFG
   ------------------
   Link Driver TC5299
        int   5
        port  300
        FRAME Ethernet_802.2
        FRAME Ethernet_802.3
        FRAME Ethernet_II
        FRAME Ethernet_SNAP
        PROTOCOL IPX 0    Ethernet_802.3
           .
           .

b. Run the following command in the order given below and
   press <Enter>:

   ECARD /io=300 /irq=5
   LSL
   TC5299
   IPXODI
   VLM

c. You can now log onto netware server.


Histories of Release:

